Temperature 8266

For use with ESP8266. Sends and receives heartbeat messages via MQTT to ensure that services are running. If a heartbeat is not received then a telegram message is sent as notification of failed service.

System can be controlled via WebUI or HomeAssistant via MQTT

Features:

• MQTT
• Telegram
• HomeAssistant integration
• Web UI, OTA and Captive portal - Based on Tasmota

Based on other 8266 projects:

• Irrigation8266
• Heartbeat8266

Installation

I use either VS Code or Arduino IDE

1. Set the board type
2. Install packages
3. Compile and upload
4. Access Web portal (default address is 192.168.4.1)
5. Set Wifi (reboot and reconnect to new IP)
6. Set other settings via Web UI