THIS REPO IS DEPRECATED

---

---

---

⚠️ EL7 DISA STIG InSpec Profile is now maintained by MITRE at https://github.com/mitre/redhat-enterprise-linux-7-stig-baseline ⚠️

---

---

---

EL7 DISA STIG InSpec Profile Maintained by the SIMP Project

This InSpec profile is being developed and maintained as part of the SIMP project.

That said, it is our goal to make them valid for general purpose usage and hopefully hand them off to a more structured body as time progresses.

Testing

This repository uses either Beaker to run tests or the KitchenCI framework to run tests on the various profiles. Please see the documentation below on how to use each of the frameworks.

Testing with Beaker

To run the tests, perform the following actions:

1. Have Ruby 2.3.0 or later installed
2. Run bundle install
3. Run rake beaker:suites

Debugging

If you need to debug your systems, you can run Beaker with a couple of options:

1. Preserve the VM unconditionally

   • BEAKER_destroy=no rake beaker:suites

2. Preserve the VM unless the tests pass

   • BEAKER_destroy=onpass rake beaker:suites

You can then access the VM by going to the root level of the repository and navigating to .vagrant/beaker_vagrant_files/<automatic directory>.

You should find a Vagrantfile at that location and can use any standard Vagrant CLI Commands.

The most useful of these will be vagrant status and vagrant ssh <vm name>.

Test Layout

The tests are housed under the spec/acceptance directory and use the profiles in spec/fixtures/inspec_profiles during testing.

Testing with Kitchen

Dependencies

• Ruby 2.3.0 or later
• Virtualbox
• Vagrant

Notes to Windows Users

1. An installation of ChefDK may generate conflicts when combined with the installed kitchen gems. Recommend NOT installing ChefDK before testing with this repo.

2. If you run into errors when running bundle install, use the following commands to install gems:

• gem install kitchen-puppet
• gem install librarian-puppet
• gem install kitchen-vagrant

3. If the tests are not found when running kitchen verify, open .kitchen.yml and consult inspec_tests under the suites section.

4. You may also experience an error when running kitchen converge where a folder is unable to be created due to the length of the path. In this case, you may need to edit a registry key as explained here.

Setting up your box

1. Clone the repo via git clone -b dev https://github.com/simp/inspec_profiles.git
2. cd to inspec_profiles
3. Run bundle install
4. Run kitchen list - you should see the following choice:
   • default-centos-7
5. Run kitchen converge default-centos-7
6. Run kitchen list - your should see your host with status "converged"

Validating your box

Note: Once the open issues are resolved in InSpec and kitchen-inspec these steps will not really be needed but for now we have to do a few things a bit more manually. Once resolved fully, you will only need to run kitchen verify (machine name) and everything will be taken care of.

In the 'inspec_profiles' dir ( manually )

1. cd .kitchen/
2. vi default-centos-7.yml
3. copy the ssh_key: value for later
4. note the mapped port value ( usually 2222) and use in the next steps

In the 'inspec_profiles' dir

1. On the terminal: export SSH_KEY=(value from before)

2. cd to inspec_profiles

   • (optional) run an inspec check, and ensure there are no errors in the baseline.

3. run: inspec exec -i $SSH_KEY -t ssh://vagrant@127.0.0.1:2222 ( or the port mapped from step '4' above )

   • (optional) `inspec exec controls/V-#####
   • -i $SSH_KEY -t ssh://vagrant@127.0.0.1:2222` to just test a single control
   • (optional) inspec exec -i $SSH_KEY --controls=V-#####,V-##### -t ssh://vagrant@127.0.0.1:2222 to just test a small set of controls

Hardening Development

If you are going to be working on the ansible scripts you can continue to run kitchen converge and it will rerun your ansible scripts without going through the entire machine creations process etc.

• Making Changes and Testing

  • run kitchen converge (machine name) - runs any changes to your hardening scripts
  • run kitchen verify (machine name) - runs the inspec tests

• Starting Clean:

  • run kitchen destroy (machine name) kitchen will drop your box and you can start clean

• Going through the entire process ( create, build, configure, verify, destroy )

  • run kitchen test (machine name) or to test all defined machines kitchen test

• Just running the validation scripts

  • run kitchen verify (machine name)

• just run one or more controls in the validation

  • edit the .kitchen.yml file in the controls: section add the control id(s) to the list

Saving your output

Regular Text File

• To save your output just use > output.txt

Save as HTML

In the tools directory there are a few useful scripts for getting a little better output for general display and demo, to use them see the README.md file in the tools directory or as an example:

• kitchen converge (machine name) | ./tools/ansi2html.sh --bg=dark > kitchen-run.html
• inspec exec . -i $SSH_KEY -t ssh://vagrant@127.0.0.1:2222 | ./tools/ansi2html.sh --bg=dark > inspec-validation-run.html