This enclosure fits a camera from a salvaged Wiimote and eatnooM's brilliant little PCB board: https://github.com/eatnooM/pixart-sensor-adapter
Same dimensions as the DFRobot version but a bit shorter. Designed to work with eatnooM's PCB. Includes a jig to hold the camera piece in place while soldering (with arms to fix to "helping hands") Also included a push-fit lens mount. IR filter needs to be glued to the front but I've left a gap between the camera pinhole and the lens/lens mount, where the thickness of a WiiMote IR filter will fit snugly. Parts all designed in a way that they can be printed without supports or 3D printing unfriendly angles. Everything should snap in place.
Barrel - This is the M18 Threaded barrel with a slide mount inside for the PCB Bottom - The base of the enclosure with space to feed 4 x 28AWG wires. Should push-fit into the Barrel CamHolder - This is where you insert the Wii camera and the PCB. Should push-fit into the other end of the Barrel Jig - A temporary piece to place the CamHolder so you can solder the PCB. LensHolder - Pushfit mount between the front of the enclosure and Wideagle or Fisheye lens. Includes a space to fit a piece of IR filter. Nut - An M18 Hex nut to help fix the enclosure to your controller. Print 2 of these.
Tested with printing on Elegoo Neptune 3 Pro and Bambu A1 Mini using 0.4 Nozzle and 0.2 Layer Height.
NOTE: I AM NOT CURRENTLY PROVIDING THE ORIGINAL CAD FILES.