Skip to content

ESP-32 implementation of Apple Homekit Accessory Protocol(HAP)

Notifications You must be signed in to change notification settings

slompf18/esp32_hap

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

ESP 32 Homekit stack

ESP-32 implementation of Apple Homekit Accessory Protocol(HAP). It supports Homekit via Bluetooth and wlan.

Getting started

  1. Setup Espressif development environment. Go through steps 1 to 10 in this guide (v4.2).

  2. Make your project directory a git repository:

    %> git init
    %> echo 'build' > .gitignore
    
  3. Install submodules in the project you just created ($IDF_PATH/examples/get-started/hello_world). To do this, isssue:

    %> git submodule add https://github.com/slompf18/esp32_hap_wolfssl.git components/esp32_hap_wolfssl
    %> git submodule add https://github.com/slompf18/esp32_hap.git components/esp32_hap
  4. Overwrite the content of 'hello_world_main.c' with the content of 'examples\simple_switch_ble.c' of this repository.

  5. Add the following line into CMakeLists.txt to add the esp32_hap component:

     set(COMPONENTS esptool_py esp32 esp32_hap main)
    
  6. Enable Bluetooth LE by opening the configuration idf.py menuconfig. Then select:

    1. Component config -> Bluetooth: Enable
    2. Component config -> Bluetooth -> Bluetooth Host: NimBLE - BLE only
    3. Save and Quit.
  7. Connect an led to GND and IO 19 of your ESP32.

  8. Flash and monitor the project to the esp.

Bluetooth or Wlan

When starting your project you will have to choose, which stack you want to use. You can choose your stack by calling idf.py menuconfig and selecting the option under the 'Homekit' menu entry. Here are the different advantages:

Bluetooth

  • Easy configuration
  • Uses less ressources

Wlan

  • Higher range

Develop

Unit testing

  1. cd into the test_runner directory
  2. idf.py menuconfig
  3. choose the stack of hap
  4. enable bluetooth (nimble only)
  5. disable task watchdog
  6. build and flash the test app: idf.py -p /dev/tty.SLAB_USBtoUART flash monitor

Debugging

Set log level

In order to get more (or less) verbosity, change the following line in CMakeLists.txt: set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG")

How to WireShark the IOs Device

  1. Connect device by USB
  2. Get your UDID: http://whatsmyudid.com/
  3. Check your network devices: ifconfig -l
  4. Start capturing: rvictl -s
  5. Check your network devices again: ifconfig -l
  6. Open WireShark
  7. Start capturing on the new interface (normally rvi0)
  8. Filter for http

Debug mDNS/Bonjour/Zeroconf

HomeKit uses the service type of '_hap._tcp' on the 'local.' domain, so you can query for HomeKit devices as such:

$ dns-sd -Z _hap._tcp local.

For HomeKit hubs, look for the service type of _homekit._tcp:

$ dns-sd -Z _homekit._tcp local.

Troubleshooting

  • To be able to upload to the EP-WROOM-32 when connected to a breadboard, you may need a 10K (or so) pull-down resistor between RX0 and GND.
  • In case you cannot find your device, it may be a problem with your router: https://jlian.co/post/reliable-homekit/

About

ESP-32 implementation of Apple Homekit Accessory Protocol(HAP)

Resources

Stars

Watchers

Forks

Packages

No packages published

Languages

  • C 96.7%
  • C++ 2.6%
  • Other 0.7%