This library implements Controller Area Network (CAN) communications on Linux using the SocketCAN subsystem. This provides a network socket interface to the CAN bus.
Please see the documentation for details about the Rust API provided by this library.
Version 3.0 adds integrated support for async/await, with the most popular runtimes, tokio, async-std, and smol. We have merged the tokio-socketcan crate into this one and implemented async-io.
Unfortunaly this required a minor breaking change to the existing API, so we bumped the version to 3.0.
The async support is optional, and can be enabled with a feature for the target runtime: tokio, async-std, or smol.
Additional implementation of the netlink control of the CAN interface was added in v3.1 allowing an application to do things like set the bitrate on the interface, set control modes, restart the inteface, etc.
v3.2 increased the interface configuration coverage with Netlink, allowing an application to set most interface CAN parameters and query them all back.
- #53 Added CanFD support for tokio
- Serialized tokio unit tests and put them behind the "vcan_tests" feature
- #32 Further expanded netlink functionality:
- Added setters for most additional interface CAN parameters
- Ability to query back interface CAN parameters
- Expanded
InterfaceDetailsto include CAN-specific parameters - Better integration of low-level types with
neli - Significant cleanup of the
nlmodule - Split the
nlmodule into separate sources for higher and lower-level code
A number of items still did not make it into a release. These will be added in v3.x, coming soon.
- Issue #22 Timestamps, including optional hardware timestamps
- Better documentation. This README will be expanded with basic usage information, along with better doc comments, and perhaps creation of the wiki
The current version of the crate targets Rust Edition 2021 with an MSRV of Rust v1.70.0.
Note that, the core library can likely compile with an earlier version if dependencies are carefully selected, but tests are being done with the latest stable compiler and the stated MSRV.
The tokio-socketcan crate was merged into this one to provide async support for CANbus using tokio.
This is enabled with the optional feature, tokio.
This is a simple example of sending data frames from one CAN interface to another. It is included in the example applications as tokio_bridge.rs.
use futures_util::StreamExt;
use socketcan::{tokio::CanSocket, CanFrame, Result};
use tokio;
#[tokio::main]
async fn main() -> Result<()> {
let mut sock_rx = CanSocket::open("vcan0")?;
let sock_tx = CanSocket::open("can0")?;
while let Some(Ok(frame)) = sock_rx.next().await {
if matches!(frame, CanFrame::Data(_)) {
sock_tx.write_frame(frame)?.await?;
}
}
Ok(())
}New support was added for the async-io runtime, supporting the async-std and smol runtimes.
This is enabled with the optional feature, async-io. It can also be enabled with either feature, async-std or smol. Either of those specific runtime flags will simply build the async-io support but then also alias the async-io submodule with the specific feature/runtime name. This is simply for convenience.
Additionally, when building examples, the specific examples for the runtime will be built if specifying the async-std or smol feature(s).
This is a simple example of sending data frames from one CAN interface to another. It is included in the example applications as async_std_bridge.rs.
use socketcan::{async_std::CanSocket, CanFrame, Result};
#[async_std::main]
async fn main() -> Result<()> {
let sock_rx = CanSocket::open("vcan0")?;
let sock_tx = CanSocket::open("can0")?;
loop {
let frame = sock_rx.read_frame().await?;
if matches!(frame, CanFrame::Data(_)) {
sock_tx.write_frame(&frame).await?;
}
}
}Integrating the full suite of tests into a CI system is non-trivial as it relies on a vcan0 virtual CAN device existing. Adding it to most Linux systems is pretty easy with root access, but attaching a vcan device to a container for CI seems difficult to implement.
Therefore, tests requiring vcan0 were placed behind an optional feature, vcan_tests.
The steps to install and add a virtual interface to Linux are in the scripts/vcan.sh script. Run it with root proveleges, then run the tests:
$ sudo ./scripts/vcan.sh
$ cargo test --features=vcan_tests