Merge pull request #31 from allisterb/master

Write package audit results to output window/setup Azure CI/Create new project for VS 2019 SDK

.gitattributes

@@ -0,0 +1,63 @@
+###############################################################################
+# Set default behavior to automatically normalize line endings.
+###############################################################################
+* text=auto
+
+###############################################################################
+# Set default behavior for command prompt diff.
+#
+# This is need for earlier builds of msysgit that does not have it on by
+# default for csharp files.
+# Note: This is only used by command line
+###############################################################################
+#*.cs     diff=csharp
+
+###############################################################################
+# Set the merge driver for project and solution files
+#
+# Merging from the command prompt will add diff markers to the files if there
+# are conflicts (Merging from VS is not affected by the settings below, in VS
+# the diff markers are never inserted). Diff markers may cause the following 
+# file extensions to fail to load in VS. An alternative would be to treat
+# these files as binary and thus will always conflict and require user
+# intervention with every merge. To do so, just uncomment the entries below
+###############################################################################
+#*.sln       merge=binary
+#*.csproj    merge=binary
+#*.vbproj    merge=binary
+#*.vcxproj   merge=binary
+#*.vcproj    merge=binary
+#*.dbproj    merge=binary
+#*.fsproj    merge=binary
+#*.lsproj    merge=binary
+#*.wixproj   merge=binary
+#*.modelproj merge=binary
+#*.sqlproj   merge=binary
+#*.wwaproj   merge=binary
+
+###############################################################################
+# behavior for image files
+#
+# image files are treated as binary by default.
+###############################################################################
+#*.jpg   binary
+#*.png   binary
+#*.gif   binary
+
+###############################################################################
+# diff behavior for common document formats
+# 
+# Convert binary document formats to text before diffing them. This feature
+# is only available from the command line. Turn it on by uncommenting the 
+# entries below.
+###############################################################################
+#*.doc   diff=astextplain
+#*.DOC   diff=astextplain
+#*.docx  diff=astextplain
+#*.DOCX  diff=astextplain
+#*.dot   diff=astextplain
+#*.DOT   diff=astextplain
+#*.pdf   diff=astextplain
+#*.PDF   diff=astextplain
+#*.rtf   diff=astextplain
+#*.RTF   diff=astextplain

.gitignore

@@ -0,0 +1,7 @@
+################################################################################
+# This .gitignore file was automatically created by Microsoft(R) Visual Studio.
+################################################################################
+
+/tests/NugetAuditor.Tests/bin/Debug
+/tests/NugetAuditor.Tests/obj/Debug
+/tests/NugetAuditor.Tests/.vs/NugetAuditor.Tests/v16/Server/sqlite3

azure-pipelines.yml

@@ -0,0 +1,57 @@
+# .NET Desktop
+# Build and run tests for .NET Desktop or Windows classic desktop solutions.
+# Add steps that publish symbols, save build artifacts, and more:
+# https://docs.microsoft.com/azure/devops/pipelines/apps/windows/dot-net
+
+trigger:
+- master
+
+pool:
+  vmImage: 'windows-latest'
+
+variables:
+  solution: 'src/NugetAuditor/NugetAuditor.2017.sln'
+  buildPlatform: 'Any CPU'
+  buildConfiguration: 'Release'
+  patch: $[counter('VersionCounter', 0)]
+
+name: 3.1.0.$(patch) # Set the value of $(Build.BuildNumber)
+
+steps:
+- task: PowerShell@2
+  displayName: Update version in the vsix manifest
+  inputs:
+    filePath: 'scripts/update-version.ps1'
+    arguments: '$(Build.BuildNumber)'
+    pwsh: true
+
+- task: NuGetToolInstaller@1
+
+- task: NuGetCommand@2
+  inputs:
+    restoreSolution: '$(solution)'
+
+- task: VSBuild@1
+  inputs:
+    solution: '$(solution)'
+    platform: '$(buildPlatform)'
+    configuration: '$(buildConfiguration)'
+
+- task: VSTest@2
+  inputs:
+    platform: '$(buildPlatform)'
+    configuration: '$(buildConfiguration)'
+
+- task: CopyFiles@2
+  inputs:
+    SourceFolder: '$(Build.SourcesDirectory)'
+    Contents: |
+      README.md
+      build/**
+      **/*.vsix
+    TargetFolder: '$(Build.ArtifactStagingDirectory)'
+
+- task: PublishPipelineArtifact@0
+  inputs:
+    artifactName: 'debugdrop'
+    targetPath: '$(Build.ArtifactStagingDirectory)'

scripts/update-version.ps1

@@ -0,0 +1,9 @@
+$version = $args[0]
+Write-Host "Set version: $version"
+
+# TODO: Replace the path with the path to your vsixmanifest file
+$FullPath = Resolve-Path $PSScriptRoot\..\src\NugetAuditor\NugetAuditor.VSIX\source.extension.vsixmanifest
+Write-Host $FullPath
+[xml]$content = Get-Content $FullPath
+$content.PackageManifest.Metadata.Identity.Version = $version
+$content.Save($FullPath)

src/.gitignore

@@ -227,4 +227,6 @@ _Pvt_Extensions
 .paket/paket.exe
 
 # FAKE - F# Make
-.fake/
+.fake/
+
+.vs/

src/NugetAuditor.2019/.nuget/NuGet.Config

@@ -0,0 +1,6 @@
+<?xml version="1.0" encoding="utf-8"?>
+<configuration>
+  <solution>
+    <add key="disableSourceControlIntegration" value="true" />
+  </solution>
+</configuration>

src/NugetAuditor.2019/.nuget/NuGet.targets

@@ -0,0 +1,144 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+    <PropertyGroup>
+        <SolutionDir Condition="$(SolutionDir) == '' Or $(SolutionDir) == '*Undefined*'">$(MSBuildProjectDirectory)\..\</SolutionDir>
+
+        <!-- Enable the restore command to run before builds -->
+        <RestorePackages Condition="  '$(RestorePackages)' == '' ">false</RestorePackages>
+
+        <!-- Property that enables building a package from a project -->
+        <BuildPackage Condition=" '$(BuildPackage)' == '' ">false</BuildPackage>
+
+        <!-- Determines if package restore consent is required to restore packages -->
+        <RequireRestoreConsent Condition=" '$(RequireRestoreConsent)' != 'false' ">true</RequireRestoreConsent>
+
+        <!-- Download NuGet.exe if it does not already exist -->
+        <DownloadNuGetExe Condition=" '$(DownloadNuGetExe)' == '' ">false</DownloadNuGetExe>
+    </PropertyGroup>
+
+    <ItemGroup Condition=" '$(PackageSources)' == '' ">
+        <!-- Package sources used to restore packages. By default, registered sources under %APPDATA%\NuGet\NuGet.Config will be used -->
+        <!-- The official NuGet package source (https://www.nuget.org/api/v2/) will be excluded if package sources are specified and it does not appear in the list -->
+        <!--
+            <PackageSource Include="https://www.nuget.org/api/v2/" />
+            <PackageSource Include="https://my-nuget-source/nuget/" />
+        -->
+    </ItemGroup>
+
+    <PropertyGroup Condition=" '$(OS)' == 'Windows_NT'">
+        <!-- Windows specific commands -->
+        <NuGetToolsPath>$([System.IO.Path]::Combine($(SolutionDir), ".nuget"))</NuGetToolsPath>
+    </PropertyGroup>
+
+    <PropertyGroup Condition=" '$(OS)' != 'Windows_NT'">
+        <!-- We need to launch nuget.exe with the mono command if we're not on windows -->
+        <NuGetToolsPath>$(SolutionDir).nuget</NuGetToolsPath>
+    </PropertyGroup>
+
+    <PropertyGroup>
+        <PackagesProjectConfig Condition=" '$(OS)' == 'Windows_NT'">$(MSBuildProjectDirectory)\packages.$(MSBuildProjectName.Replace(' ', '_')).config</PackagesProjectConfig>
+        <PackagesProjectConfig Condition=" '$(OS)' != 'Windows_NT'">$(MSBuildProjectDirectory)\packages.$(MSBuildProjectName).config</PackagesProjectConfig>
+    </PropertyGroup>
+
+    <PropertyGroup>
+      <PackagesConfig Condition="Exists('$(MSBuildProjectDirectory)\packages.config')">$(MSBuildProjectDirectory)\packages.config</PackagesConfig>
+      <PackagesConfig Condition="Exists('$(PackagesProjectConfig)')">$(PackagesProjectConfig)</PackagesConfig>
+    </PropertyGroup>
+
+    <PropertyGroup>
+        <!-- NuGet command -->
+        <NuGetExePath Condition=" '$(NuGetExePath)' == '' ">$(NuGetToolsPath)\NuGet.exe</NuGetExePath>
+        <PackageSources Condition=" $(PackageSources) == '' ">@(PackageSource)</PackageSources>
+
+        <NuGetCommand Condition=" '$(OS)' == 'Windows_NT'">"$(NuGetExePath)"</NuGetCommand>
+        <NuGetCommand Condition=" '$(OS)' != 'Windows_NT' ">mono --runtime=v4.0.30319 "$(NuGetExePath)"</NuGetCommand>
+
+        <PackageOutputDir Condition="$(PackageOutputDir) == ''">$(TargetDir.Trim('\\'))</PackageOutputDir>
+
+        <RequireConsentSwitch Condition=" $(RequireRestoreConsent) == 'true' ">-RequireConsent</RequireConsentSwitch>
+        <NonInteractiveSwitch Condition=" '$(VisualStudioVersion)' != '' AND '$(OS)' == 'Windows_NT' ">-NonInteractive</NonInteractiveSwitch>
+
+        <PaddedSolutionDir Condition=" '$(OS)' == 'Windows_NT'">"$(SolutionDir) "</PaddedSolutionDir>
+        <PaddedSolutionDir Condition=" '$(OS)' != 'Windows_NT' ">"$(SolutionDir)"</PaddedSolutionDir>
+
+        <!-- Commands -->
+        <RestoreCommand>$(NuGetCommand) install "$(PackagesConfig)" -source "$(PackageSources)"  $(NonInteractiveSwitch) $(RequireConsentSwitch) -solutionDir $(PaddedSolutionDir)</RestoreCommand>
+        <BuildCommand>$(NuGetCommand) pack "$(ProjectPath)" -Properties "Configuration=$(Configuration);Platform=$(Platform)" $(NonInteractiveSwitch) -OutputDirectory "$(PackageOutputDir)" -symbols</BuildCommand>
+
+        <!-- We need to ensure packages are restored prior to assembly resolve -->
+        <BuildDependsOn Condition="$(RestorePackages) == 'true'">
+            RestorePackages;
+            $(BuildDependsOn);
+        </BuildDependsOn>
+
+        <!-- Make the build depend on restore packages -->
+        <BuildDependsOn Condition="$(BuildPackage) == 'true'">
+            $(BuildDependsOn);
+            BuildPackage;
+        </BuildDependsOn>
+    </PropertyGroup>
+
+    <Target Name="CheckPrerequisites">
+        <!-- Raise an error if we're unable to locate nuget.exe  -->
+        <Error Condition="'$(DownloadNuGetExe)' != 'true' AND !Exists('$(NuGetExePath)')" Text="Unable to locate '$(NuGetExePath)'" />
+        <!--
+        Take advantage of MsBuild's build dependency tracking to make sure that we only ever download nuget.exe once.
+        This effectively acts as a lock that makes sure that the download operation will only happen once and all
+        parallel builds will have to wait for it to complete.
+        -->
+        <MsBuild Targets="_DownloadNuGet" Projects="$(MSBuildThisFileFullPath)" Properties="Configuration=NOT_IMPORTANT;DownloadNuGetExe=$(DownloadNuGetExe)" />
+    </Target>
+
+    <Target Name="_DownloadNuGet">
+        <DownloadNuGet OutputFilename="$(NuGetExePath)" Condition=" '$(DownloadNuGetExe)' == 'true' AND !Exists('$(NuGetExePath)')" />
+    </Target>
+
+    <Target Name="RestorePackages" DependsOnTargets="CheckPrerequisites">        
+        <Exec Command="$(RestoreCommand)"
+              Condition="'$(OS)' != 'Windows_NT' And Exists('$(PackagesConfig)')" />
+
+        <Exec Command="$(RestoreCommand)"
+              LogStandardErrorAsError="true"
+              Condition="'$(OS)' == 'Windows_NT' And Exists('$(PackagesConfig)')" />
+    </Target>
+
+    <Target Name="BuildPackage" DependsOnTargets="CheckPrerequisites">
+        <Exec Command="$(BuildCommand)"
+              Condition=" '$(OS)' != 'Windows_NT' " />
+
+        <Exec Command="$(BuildCommand)"
+              LogStandardErrorAsError="true"
+              Condition=" '$(OS)' == 'Windows_NT' " />
+    </Target>
+
+    <UsingTask TaskName="DownloadNuGet" TaskFactory="CodeTaskFactory" AssemblyFile="$(MSBuildToolsPath)\Microsoft.Build.Tasks.v4.0.dll">
+        <ParameterGroup>
+            <OutputFilename ParameterType="System.String" Required="true" />
+        </ParameterGroup>
+        <Task>
+            <Reference Include="System.Core" />
+            <Using Namespace="System" />
+            <Using Namespace="System.IO" />
+            <Using Namespace="System.Net" />
+            <Using Namespace="Microsoft.Build.Framework" />
+            <Using Namespace="Microsoft.Build.Utilities" />
+            <Code Type="Fragment" Language="cs">
+                <![CDATA[
+                try {
+                    OutputFilename = Path.GetFullPath(OutputFilename);
+
+                    Log.LogMessage("Downloading latest version of NuGet.exe...");
+                    WebClient webClient = new WebClient();
+                    webClient.DownloadFile("https://www.nuget.org/nuget.exe", OutputFilename);
+
+                    return true;
+                }
+                catch (Exception ex) {
+                    Log.LogErrorFromException(ex);
+                    return false;
+                }
+            ]]>
+            </Code>
+        </Task>
+    </UsingTask>
+</Project>

src/NugetAuditor.2019/NugetAuditor.2019.sln

@@ -0,0 +1,31 @@
+
+Microsoft Visual Studio Solution File, Format Version 12.00
+# Visual Studio Version 16
+VisualStudioVersion = 16.0.29209.62
+MinimumVisualStudioVersion = 10.0.40219.1
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "NugetAuditor.VSIX.2019", "NugetAuditor.VSIX.2019\NugetAuditor.VSIX.2019.csproj", "{2AB4AB06-EFCA-4DCC-A95B-ACDA3292EE97}"
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "NugetAuditor.Lib", "NugetAuditor.Lib\NugetAuditor.Lib.csproj", "{B7B53C9B-AAB6-496C-92FA-5E315A71753B}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|Any CPU = Debug|Any CPU
+		Release|Any CPU = Release|Any CPU
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{2AB4AB06-EFCA-4DCC-A95B-ACDA3292EE97}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{2AB4AB06-EFCA-4DCC-A95B-ACDA3292EE97}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{2AB4AB06-EFCA-4DCC-A95B-ACDA3292EE97}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{2AB4AB06-EFCA-4DCC-A95B-ACDA3292EE97}.Release|Any CPU.Build.0 = Release|Any CPU
+		{B7B53C9B-AAB6-496C-92FA-5E315A71753B}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{B7B53C9B-AAB6-496C-92FA-5E315A71753B}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{B7B53C9B-AAB6-496C-92FA-5E315A71753B}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{B7B53C9B-AAB6-496C-92FA-5E315A71753B}.Release|Any CPU.Build.0 = Release|Any CPU
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+		SolutionGuid = {F7EE3754-A943-479D-B509-B38EADC8196A}
+	EndGlobalSection
+EndGlobal