Update channel connection for RFSoC2x2

strath-sdr · Feb 23, 2021 · ba49476 · ba49476
1 parent 55766a3
commit ba49476
Show file tree

Hide file tree

Showing 3 changed files with 2 additions and 2 deletions.
diff --git a/boards/RFSoC2x2/rfsoc_qpsk/notebooks/images/rfsoc2x2_setup.jpg b/boards/RFSoC2x2/rfsoc_qpsk/notebooks/images/rfsoc2x2_setup.jpg
diff --git a/boards/RFSoC2x2/rfsoc_qpsk/notebooks/rfsoc_qpsk_demonstrator.ipynb b/boards/RFSoC2x2/rfsoc_qpsk/notebooks/rfsoc_qpsk_demonstrator.ipynb
@@ -58,7 +58,7 @@
     "Your RFSoC2x2 development board can be configured to host one QPSK transceiver channel. To setup your board for this demonstration, you can connect a channel in loopback as shown in [Figure 1](#fig-1).\n",
     "\n",
     "The default loopback configuration is connected as follows:\n",
-    "* Channel 0: DAC1 to ADC1\n",
+    "* Channel 0: DAC2 to ADC2\n",
     "\n",
     "Use the image below for further guidance.\n",
     "\n",

diff --git a/boards/RFSoC2x2/rfsoc_qpsk/notebooks/voila_rfsoc_qpsk_demonstrator.ipynb b/boards/RFSoC2x2/rfsoc_qpsk/notebooks/voila_rfsoc_qpsk_demonstrator.ipynb
@@ -50,7 +50,7 @@
     "Your RFSoC2x2 development board can be configured to host one QPSK transceiver channel. To setup your board for this demonstration, you can connect a channel in loopback as shown in [Figure 1](#fig-1).\n",
     "\n",
     "The default loopback configuration is connected as follows:\n",
-    "* Channel 0: DAC1 to ADC1\n",
+    "* Channel 0: DAC2 to ADC2\n",
     "\n",
     "Use the image below for further guidance.\n",
     "\n",