Made paths relative and moved Members into docs

docs/members/.pages → docs/.pages

@@ -1,4 +1,6 @@
 nav:
+    - index.md
+    - SYN Shop Vision.md
     - FAQ.md
     - kiosk.md
     - About SYN Shop
@@ -7,3 +9,5 @@ nav:
     - Projects
     - Resources
     - Documents
+    - ...
+    - tags.md

docs/members/Equipment/3D Printing/index.md → docs/Equipment/3D Printing/index.md

@@ -6,4 +6,4 @@
     * [Cetus3D](https://www.cetus3d.com/) - PLA Only printer
     * [Bambu X1 Carbon](https://bambulab.com/en-us/x1) (2 printers) - With 4 Filament AMS
     * [Anycubic Photon Series LCD-Based SLA Resin 3D Printer](https://www.anycubic.com/collections/anycubic-photon-3d-printers/products/anycubic-photon-3d-printer) - 3 printers
-    * [Fusion 3 F400-s](/members/Equipment/F400-s) - Large format PLA 3D Printer
+    * [Fusion 3 F400-s](F400-s) - Large format PLA 3D Printer

docs/members/Equipment/Crafts/Industrial Sewing Maching.md → docs/Equipment/Crafts/Industrial Sewing Maching.md

@@ -20,29 +20,29 @@ tags:
 ## Usage
 This is the green industrial table mounted sewing machine located in the craft room.  It should be plugged into the far  wall from the doorway.  The switch for the motor is on the right hand side under the table.  There will be a audibly noticeable hum if the motor is plugged in and is turned on.
 
-![ ](/members/Equipment/images/230IndustrialMachine/230machine.jpg)
+![ ](../images/230IndustrialMachine/230machine.jpg)
 
 ### Winding the Bobbin
 This machine has a separate bobbin winding mechanism to the right of the machine that is threaded differently from threading the machine.  The thread stand has a place for two cones so if you have a second cone of the color you are using, you can leave the machine threaded and thread the bobbin winder with the other one.  Otherwise, you will have to remove the thread from the machine, and wind the bobbin first, then re-thread the machine.
-![Threading the winder](/members/Equipment/images/230IndustrialMachine/230machine_bobbin_3.jpg)
+![Threading the winder](../images/230IndustrialMachine/230machine_bobbin_3.jpg)
 
 Feed the thread into the hole above, then seat between the plates, back to front.
 
 The bobbin for this machine is underneath the table. If you open the bobbin cover, it will be easier to see your fingers and not have to stick your head under the desk to get the bobbin carrier out
-![Open bobbin cover](/members/Equipment/images/230IndustrialMachine/230machine_bobbin_1.jpg)
-![Retrieve the bobbin](/members/Equipment/images/230IndustrialMachine/230machine_bobbin_2.jpg)
+![Open bobbin cover](../images/230IndustrialMachine/230machine_bobbin_1.jpg)
+![Retrieve the bobbin](../images/230IndustrialMachine/230machine_bobbin_2.jpg)
 
 Once the bobbin carrier is out, remove the bobbin. On the bobbin winder, there is a lever that you can pull towards you.
-![Lever closed](/members/Equipment/images/230IndustrialMachine/230machine_bobbin_4.jpg)
-![Lever open](/members/Equipment/images/230IndustrialMachine/230machine_bobbin_5.jpg)
+![Lever closed](../images/230IndustrialMachine/230machine_bobbin_4.jpg)
+![Lever open](../images/230IndustrialMachine/230machine_bobbin_5.jpg)
 Once the lever is open, slide the bobbin onto the spindle and pass the thread through one of the holes in the bobbin.  Close the lever again. Pressing the pedal will now wind the bobbin, hold the thread for a few rotations.
-![Winding the bobbin](/members/Equipment/images/230IndustrialMachine/230machine_bobbin_7.jpg)
+![Winding the bobbin](../images/230IndustrialMachine/230machine_bobbin_7.jpg)
 
 ### Threading the machine
 You can use a separate cone for the machine than the bobbin, but if you only have one, remove the thread from the bobbin threading. Instead bring the thread over to the top of the machine and follow the picture sequence below to properly thread the machine
-![Down, through the plate, around the tension plates, and out the front plate](/members/Equipment/images/230IndustrialMachine/230machine_threading_1.jpg)
-![Successively down through the holes on the front plate, down to the tension plates, around and catch the tensioner wire, thread goes left. Under the hook, up and around the clip, through the machine bar, down around the left clip](/members/Equipment/images/230IndustrialMachine/230machine_threading_2.jpg)
-![Into the thread guide, around into the opening at the back of the needle collar and down to the needle, and through](/members/Equipment/images/230IndustrialMachine/230machine_threading_3.jpg)
+![Down, through the plate, around the tension plates, and out the front plate](../images/230IndustrialMachine/230machine_threading_1.jpg)
+![Successively down through the holes on the front plate, down to the tension plates, around and catch the tensioner wire, thread goes left. Under the hook, up and around the clip, through the machine bar, down around the left clip](../images/230IndustrialMachine/230machine_threading_2.jpg)
+![Into the thread guide, around into the opening at the back of the needle collar and down to the needle, and through](../images/230IndustrialMachine/230machine_threading_3.jpg)
 
 
 ## Maintenance

docs/members/Equipment/Danger Room/index.md → docs/Equipment/Danger Room/index.md

@@ -17,15 +17,15 @@
 * Kiln - for melting stuff
 
 * Free Standing Power Tools 
-    * [ShopBot](/members/Equipment/ShopBot) PRSstandard CNC [96-48](https://www.shopbottools.com/products/standard)
-    * [Table Saw](/members/Equipment/Danger Room/Table Saw/) - Delta cabinet saw
-    * [Table Saw](/members/Equipment/Danger Room/Table Saw/) - Grizzly G1023RLWX 10" 5HP 240V Tablesaw, CAB. LEFTTILT
-    * [Track Saw: Grizzly PRO T33300](/members/Equipment/Danger Room/Track Saw) - 6-1/4" Track Saw with 110 inch rails
-    * [Band Saw](/members/Equipment/Danger Room/Band Saw) (Grizzly G0513ANV - 17" 2 HP Band Saw, Anniversary Edition)
+    * [ShopBot](ShopBot) PRSstandard CNC [96-48](https://www.shopbottools.com/products/standard)
+    * [Table Saw](Table Saw) - Delta cabinet saw
+    * [Table Saw](Table Saw) - Grizzly G1023RLWX 10" 5HP 240V Tablesaw, CAB. LEFTTILT
+    * [Track Saw: Grizzly PRO T33300](Track Saw) - 6-1/4" Track Saw with 110 inch rails
+    * [Band Saw](Band Saw) (Grizzly G0513ANV - 17" 2 HP Band Saw, Anniversary Edition)
     * Router table: Ryobi router and table
-    * [14" Surface Planer](/members/Equipment/Danger Room/Surface Planer) - Powermatic 
-    * [8" Jointer](/members/Equipment/Danger Room/Jointer)
-    * [Drill Press](/members/Equipment/Danger Room/Drill Press) - Craftsman Professional 3/4 hp 17'' Drill Press 
+    * [14" Surface Planer](Surface Planer) - Powermatic 
+    * [8" Jointer](Jointer)
+    * [Drill Press](Drill Press) - Craftsman Professional 3/4 hp 17'' Drill Press 
     * Dust Collector to all free stranding tools
 
 * Hand Tools
@@ -44,6 +44,5 @@
     * Angle Grinder - Dewalt 
 
 ## Welding
-
     * MIG Welder - Hobart 110 Amp MIG/Flux Wire Welder 
     * Stick Welder

docs/members/Equipment/Laser Cutting/Big Boi Laser Cutter.md → docs/Equipment/Laser Cutting/Big Boi Laser Cutter.md

@@ -8,11 +8,11 @@ tags:
 
 * The shop's largest laser cutter, thus it is called "Big Boi"
 * 150 Watt Pro LF Series 48" x 36" CO2
-* Uses [Retina Engrave](/members/Software/Retina Engrave)
-* See also ["First Child"](/members/Equipment/Laser Cutting/First Child Laser Cutter) and ["New Kid"](/members/Equipment/Laser Cutting/New Kid Laser Cutter) laser cutters
+* Uses [Retina Engrave](../Software/Retina Engrave)
+* See also ["First Child"](../Equipment/Laser Cutting/First Child Laser Cutter) and ["New Kid"](../Equipment/Laser Cutting/New Kid Laser Cutter) laser cutters
 
-![ ](images/lasercutters/big.boi.far.jpg)
-![ ](images/lasercutters/big.boi.close.jpg)
+![ ](../images/lasercutters/big.boi.far.jpg)
+![ ](../images/lasercutters/big.boi.close.jpg)
 
 ## Current Status
 

docs/members/Equipment/Laser Cutting/First Child Laser Cutter.md → docs/Equipment/Laser Cutting/First Child Laser Cutter.md

@@ -7,16 +7,16 @@ tags:
 
    * The shop's first laser cutter, thus it is called "First Child"
    * 90 Watt Pro LF Series 24" x 18" CO2
-   * Uses [Retina Engrave](/members/Software/Retina Engrave)
-   * See also ["Big Boi"](/members/Equipment/Big Boi Laser Cutter) and ["New Kid"](/members/Equipment/New Kid Laser Cutter) laser cutters
+   * Uses [Retina Engrave](../../Software/Retina Engrave)
+   * See also ["Big Boi"](../Equipment/Big Boi Laser Cutter) and ["New Kid"](../Equipment/New Kid Laser Cutter) laser cutters
 
-![ ](images/lasercutters/first.child.far.jpg)
-![ ](images/lasercutters/first.child.close.jpg)
+![ ](../images/lasercutters/first.child.far.jpg)
+![ ](../images/lasercutters/first.child.close.jpg)
 
 ## Current Status
 
-- **Functional** - Laser cutter is currently down for maintance.
+- **Functional** - Laser cutter is currently down for maintenance.
 - **Remaining Issues:** Laser tube has been removed awaiting replacement and alignment of the new tube.
-- Laser cutter is scheduled to be upgraded to a new controller to enable the use of LightBurn software. It will remane unavailable until the upgrade is completed.
+- Laser cutter is scheduled to be upgraded to a new controller to enable the use of LightBurn software. It will remain unavailable until the upgrade is completed.
 
 ### Maintenance Log

docs/Equipment/Laser Cutting/New Kid Laser Cutter.md

@@ -0,0 +1,20 @@
+---
+tags:
+    - equipment
+    - laser cutter
+---
+# "New Kid"  Laser Cutter
+
+* The shop's newest laser cutter, thus it is called "New Kid"
+* 90 Watt Pro LF Series 24" x 18" CO2
+* Uses [Retina Engrave](../../Software/Retina Engrave)
+* See also ["Big Boi"](../Equipment/Big Boi Laser Cutter) and ["First Child"](../Equipment/First Child Laser Cutter) laser cutters
+
+![ ](../images/lasercutters/new.kid.far.jpg)
+![ ](../images/lasercutters/new.kid.close.jpg)
+
+## Current Status
+
+- **Operational**
+
+### Maintenance Log

docs/Equipment/Laser Cutting/index.md

@@ -0,0 +1,11 @@
+# Laser Cutting
+
+
+## About
+## Activities
+## Equipment
+* Full Spectrum Laser Cutters:
+    * All laser cutters use [Retina Engrave](../Software/Retina Engrave)
+    * ["First Child"](../Equipment/Laser Cutting/First Child Laser Cutter) -  90 Watt Pro LF Series 24" x 18" CO2 (Currently being rebuilt)
+    * ["Big Boi"](../Equipment/Laser Cutting/Big Boi Laser Cutter) - 150 Watt Pro LF Series 48" x 36" CO2
+    * ["New Kid"](../Equipment/Laser Cutting/New Kid Laser Cutter) - Full Spectrum -  90 Watt Pro LF Series 24" x 16" CO2

docs/members/Equipment/Print and Office/Garment Printer.md → docs/Equipment/Print and Office/Garment Printer.md

@@ -25,20 +25,20 @@ Therefore it is only available on the print room lap top.
 
 ### Required
 
-| Program                          | Description                                                      |
-|----------------------------------|------------------------------------------------------------------|
-| [DTGRIP](/members/Software/DTGRIP) | The software that lets you tweak the DTG settings prior to print |
-| EPSON Driver                     | The driver is preinstalled on the computer.                      |
-|                                  | DO NOT UPDATE THIS DRIVER. THE DTG WILL BE BRICKED.              |
+| Program                         | Description                                                      |
+|---------------------------------|------------------------------------------------------------------|
+| [DTGRIP](../../Software/DTGRIP) | The software that lets you tweak the DTG settings prior to print |
+| EPSON Driver                    | The driver is preinstalled on the computer.                      |
+|                                 | DO NOT UPDATE THIS DRIVER. THE DTG WILL BE BRICKED.              |
 
 ### Optional
 
 | Program                                                          | Description                                                         |
 |------------------------------------------------------------------|---------------------------------------------------------------------|
-| [Image Manipulation Program](/members/Software/Image Manipulation) | Software that lets you alter images. GIMP, Photoshop, Krita         |
-| [Vector Graphics Program](/members/Software/Vector Graphics)       | Software that edits vectorized graphics. Size independent software. |
-| [Image Manipulation Program](/members/Software/Image Manipulation) | Software that lets you alter images. GIMP, Photoshop, Krita         |
-| [Vector Graphics Program](/members/Software/Vector Graphics)       | Software that edits vectorized graphics. Size independent software. |
+| [Image Manipulation Program](../../Software/Image Manipulation) | Software that lets you alter images. GIMP, Photoshop, Krita         |
+| [Vector Graphics Program](../../Software/Vector Graphics)       | Software that edits vectorized graphics. Size independent software. |
+| [Image Manipulation Program](../../Software/Image Manipulation) | Software that lets you alter images. GIMP, Photoshop, Krita         |
+| [Vector Graphics Program](../../Software/Vector Graphics)       | Software that edits vectorized graphics. Size independent software. |
 
 ## Cost and Consumables 
 This machine uses fabric and printer ink.
@@ -56,7 +56,7 @@ It may be able to print more with additional adjustments.
 ## Usage
 Please note different fabrics will have different qualities and issues.
 ### Preparation
-* Please see [DTGRIP](/members/Software/DTGRIP) for a comprehensive guide to software settings.
+* Please see [DTGRIP](../../Software/DTGRIP) for a comprehensive guide to software settings.
 * Shake ink bottles.
 
 !!! tip "Recommended: Pretreatment"

docs/members/Equipment/Print and Office/Large Format Laminator.md → docs/Equipment/Print and Office/Large Format Laminator.md

@@ -11,9 +11,9 @@ Any changes to this template should be updated in the manual of style too.
 
 ## Manuals 
 
-The instruction manual for this machine is [available in PDF form](/members/Equipment/Print%20and%20Office/gbc_ultima_65_user_manual.pdf). 
+The instruction manual for this machine is [available in PDF form](gbc_ultima_65_user_manual.pdf). 
 
-If something more serious starts happening, the service manual is also [available](/members/Equipment/Print and Office/ultima_65-service-manual.pdf). Note that both of these manuals are for later-models of this laminator, so there may be some slight differences.
+If something more serious starts happening, the service manual is also [available](ultima_65-service-manual.pdf). Note that both of these manuals are for later-models of this laminator, so there may be some slight differences.
 
 ## Costs and Consumables 
 The cost of lamination is $.20 per foot. Base this on the finished item-- if you are laminating a poster that is 2” wide and 3” tall, please donate $.60 to the shop; don’t worry about the 3-5 inches needed at the top and bottom of the object to feed it into the laminator. If you accidentally burn through more than a foot of film learning how to set up your job, please toss a coin to your witcher.

docs/members/Equipment/Print and Office/Large Format Printer.md → docs/Equipment/Print and Office/Large Format Printer.md

@@ -12,7 +12,7 @@ tags:
 # Canon iPF6400SE Large Format Printer
 
 The Large Format Printer is located in the Print room. 
-![ ](images/largeformatprinter/large.format.printer.png)
+![ ](../images/largeformatprinter/large.format.printer.png)
 
 ## Manuals 
 Documentation can be found at:

docs/members/Equipment/Print and Office/index.md → docs/Equipment/Print and Office/index.md

@@ -4,14 +4,14 @@
 ## Activities
 ## Equipment
 ### Standard Printing
-* [Brother P-Touch PT-P700 24mm Label Maker](/members/Equipment/Print and Office/P-Touch Label Maker/)
-* [SHARP MX-3070v A3 Multifunction Printer](/members/Equipment/Print and Office/Multi-Function Printer/)
+* [Brother P-Touch PT-P700 24mm Label Maker](P-Touch Label Maker)
+* [SHARP MX-3070v A3 Multifunction Printer](Multi-Function Printer)
 * Brother QL-500 Label Printer
 * Akiles APLP Pro-Lam Plus 330 13" Laminator
 
 ### Large Format Printing
-* [Canon iPF6400SE 24" Large Format Printer](/members/Equipment/Print and Office/Large Format Printer/)
-* [GBC Ultima 65 LArge Format Laminator](/members/Equipment/Print and Office/Large Format Laminator/)
+* [Canon iPF6400SE 24" Large Format Printer](Large Format Printer)
+* [GBC Ultima 65 LArge Format Laminator](Large Format Laminator)
 * 36" Cold Laminator
 ### Cutting
 * Caiba 470F Maual Paper 18" Cutting Guillotine
@@ -36,10 +36,10 @@
 * Swingline Electric Stapler
 * Carl XHC-2100N Heavy Duty 2 Hole Punch
 * Bostitch 2240 3 Hole Punch
-* Swingline 350/400 3 Hole Punch
+* Swingline 350400 3 Hole Punch
 
 ### Garment and Miscelaneous Media
-* [iehk A4 DTG A4 T-Shirt Printer](/members/Equipment/Print and Office/Garment Printer/)
+* [iehk A4 DTG A4 T-Shirt Printer](Garment Printer)
 * Ephotoinc 15"x15" Heat Press
 * Nix Pro 2 Color Sensor
 * Nix Mini Color Sensor