SML: FastExit for binary SML parsing (#1389)

This is documentation for arendst/Tasmota#21497

docs/Smart-Meter-Interface.md

@@ -100,7 +100,7 @@ Declare `>M` section with the number of connected meters (n = `1..5`):
 | `+<M>` | Meter number. The number must be increased with each additional Meter (default 1 to 5).|
 | `<rxGPIO>` | The GPIO pin number where meter data is received. <BR> [xxx.xxx.xxx.xxx] IP number instead of pin number enables MODBUS TCP mode, the tcp port number is given at the baudrate position. (tx pin can be any number and is ignored)|
 | `<type>` | The type of meter: <BR>- `o` - OBIS ASCII type of coding<BR>- `s` - SML binary smart message coding<BR>- `e` - EBus binary coding<BR>- `v` - VBus binary coding<BR>- `m` - MODBus binary coding with serial mode 8N1<BR>- `M` - MODBus binary coding with serial mode 8E1<BR>- `k` - Kamstrup binary coding with serial mode 8N1<BR>- `C` - CANBus type<BR>- `c` - Counter type<BR>- `r` - Raw binary coding (any binary telegram) |
-| `<flag>` | Options flag:<BR>- `0` - counter without pullup<BR>- `1` - counter with pullup<BR>- `16` - enable median filter for that meter. Can help with sporadic dropouts, reading errors (not available for counters). this option is enabled by default #define USE_SML_MEDIAN_FILTER, if you are low on memory and dont use this feature you may outcomment this define in the driver |
+| `<flag>` | Options flag:<BR>- `0` - counter without pullup<BR>- `1` - counter with pullup<BR>- `16` - enable median filter for that meter. Can help with sporadic dropouts, reading errors (not available for counters). this option is enabled by default #define USE_SML_MEDIAN_FILTER, if you are low on memory and dont use this feature you may outcomment this define in the driver<BR>- `32` - Disable FastExit for binary SML parsing. See [#21497](https://github.com/arendst/Tasmota/pull/21497) for details |
 | `<parameter>` | Parameters according to meter type:<BR>- for `o,s,e,v,m,M,k,r` types: serial baud rate e.g. `9600` (or port# for Modbus TCP).<BR>- for type `C` Canbus Baudrates and Number of receive buffers (*100). (see example R4850G2)<BR>- 0 = 25 KBITS<BR>- 1 = 50 KBITS<BR>- 2 = 100 KBITS<BR>- 3 = 125 KBITS<BR>- 4 = 250 KBITS<BR>- 5 = 500 KBITS<BR>- 6 = 800 KBITS<BR>- 7 = 1 MBITS<BR>- for `c` type: a positive value = counter poll interval (not really recommended) or a negative value = debounce time (milliseconds) for irq driven counters. |
 | `<jsonPrefix>` | Prefix for Web UI and MQTT JSON payload. Up to 7 characters.|
 | `<txGPIO>` | The GPIO pin number where meter command is transmitted (optional).|