Style definitions for nice terminal layouts.
- Ported from/Inspired by: https://github.com/charmbracelet/lipgloss/tree/master
- If you're a Go developer, please check out their CLI tooling and libraries. They're unmatched!
- First, you'll need to configure your
mojoproject.tomlfile to include my Conda channel. Add"https://repo.prefix.dev/mojo-community"to the list of channels. - Next, add
mogto your project's dependencies by runningmagic add mog. - Finally, run
magic installto install inmogand its dependencies. You should see the.mojopkgfiles in$CONDA_PREFIX/lib/mojo/.
Mog takes an expressive, declarative approach to terminal rendering. Users familiar with CSS will feel at home with Mog.
import mog
var style = mog.Style() \
.bold(True) \
.foreground(mog.Color(0xFAFAFA)) \
.background(mog.Color(0x7D56F4)) \
.padding_top(2) \
.padding_left(4) \
.width(22)
print(style.render("Hello, kitty"))Mog supports the following color profiles:
mog.Color(5) # magenta
mog.Color(9) # red
mog.Color(12) # light bluemog.Color(86) # aqua
mog.Color(201) # hot pink
mog.Color(202) # orangemog.Color(0x0000FF) # good ol' 100% blue
mog.Color(0x04B575) # a green
mog.Color(0x3C3C3C) # a dark gray...as well as a 1-bit ASCII profile, which is black and white only.
The terminal's color profile will soon be automatically detected, and colors outside the gamut of the current palette will be automatically coerced to their closest available value.
For now, the library assumes a dark background. You can set this to light by modifying the style's profile field.
You can also specify color options for light and dark backgrounds:
mog.AdaptiveColor(light=236, dark=248)The terminal's background color will automatically be detected and the appropriate color will be chosen at runtime.
CompleteColor specifies exact values for truecolor, ANSI256, and ANSI color profiles.
mog.CompleteColor(true_color=0x0000FF, ansi256=86, ansi=5)Automatic color degradation will not be performed in this case and it will be based on the color specified.
You can use CompleteColor with AdaptiveColor to specify the exact values for light and dark backgrounds without automatic color degradation.
mog.CompleteAdaptiveColor(
light = mog.CompleteColor(true_color=0xd7ffae, ansi256=193, ansi=11),
dark = mog.CompleteColor(true_color=0xd75fee, ansi256=163, ansi=5),
)
Mog supports the usual ANSI text formatting options:
var style = mog.Style() \
.bold(True) \
.italic(True) \
.faint(True) \
.blink(True) \
.crossout(True) \
.underline(True) \
.reverse(True)Mog also supports rules for block-level formatting:
# Padding
var style = mog.Style() \
.padding_top(2) \
.padding_right(4) \
.padding_bottom(2) \
.padding_left(4)
# Margins
var style = mog.Style() \
.margin_top(2) \
.margin_right(4) \
.margin_bottom(2) \
.margin_left(4)There is also shorthand syntax for margins and padding, which follows the same format as CSS:
# 2 cells on all sides
mog.Style().padding(2)
# 2 cells on the top and bottom, 4 cells on the left and right
mog.Style().margin(2, 4)
# 1 cell on the top, 4 cells on the sides, 2 cells on the bottom
mog.Style().padding(1, 4, 2)
# Clockwise, starting from the top: 2 cells on the top, 4 on the right, 3 on
# the bottom, and 1 on the left
mog.Style().margin(2, 4, 3, 1)You can align paragraphs of text to the left, right, or center.
var style = mog.Style() \
.width(24) \
.align(position.left) \ # align it left
.align(position.right) \ # no wait, align it right
.align(position.center) # just kidding, align it in the centerSetting a minimum width and height is simple and straightforward.
var style = mog.Style() \
.set_string("What’s for lunch?") \
.width(24) \
.height(32) \
.foreground(mog.Color(63))Adding borders is easy:
# Add a purple, rectangular border
var style = mog.Style() \
.border(NORMAL_BORDER) \
.border_foreground(mog.Color(63))
# Set a rounded, yellow-on-purple border to the top and left
var another_style = mog.Style() \
.border(ROUNDED_BORDER) \
.border_foreground(mog.Color(228)) \
.border_background(mog.Color(63)) \
.border_top(True) \
.border_left(True)
# Make your own border
var my_cute_border = Border(
top = "._.:*:",
bottom = "._.:*:",
left = "|*",
right = "|*",
top_left = "*",
top_right = "*",
bottom_left = "*",
bottom_right = "*",
)There are also shorthand functions for defining borders, which follow a similar pattern to the margin and padding shorthand functions.
# Add a thick border to the top and bottom
mog.Style().border(THICK_BORDER, True, False)
# Add a double border to the top and left sides. Rules are set clockwise
# from top.
mog.Style().border(DOUBLE_BORDER, True, False, False, True)All rules can be unset:
var style = mog.Style() \
.bold(True) \ # make it bold
.unset_bold() \ # jk don't make it bold
.background(mog.Color(227)) \ # yellow background
.unset_background() # never mindWhen a rule is unset, it won't be inherited or copied.
Sometimes, such as when developing a component, you want to make sure style
definitions respect their intended purpose in the UI. This is where inline
and max_width, and max_height come in:
# Force rendering onto a single line, ignoring margins, padding, and borders.
some_style.inline(True).render("yadda yadda")
# Also limit rendering to five cells
some_style.inline(True).max_width(5).render("yadda yadda")
# Limit rendering to a 5x5 cell block
some_style.max_width(5).max_height(5).render("yadda yadda")The tab character (\t) is rendered differently in different terminals (often
as 8 spaces, sometimes 4). Because of this inconsistency, Mog converts
tabs to 4 spaces at render time. This behavior can be changed on a per-style
basis, however:
style = mog.Style() # tabs will render as 4 spaces, the default
style = style.tab_width(2) # render tabs as 2 spaces
style = style.tab_width(0) # remove tabs entirely
style = style.tab_width(mog.NO_TAB_CONVERSION) # leave tabs intactGenerally, you just call the render(string) method on a mog.Style:
var style = mog.Style().bold(True).set_string("Hello,")
print(style.render("kitty.")) # Hello, kitty.
print(style.render("puppy.")) # Hello, puppy.
print(style.render("my", "puppy.")) # Hello, my puppy.But you could also use the Stringer interface:
var style = mog.Style().set_string("你好，猫咪。").bold(True)
print(style) # 你好，猫咪。Custom renderers allow you to render to a specific outputs. This is particularly important when you want to render to different outputs and correctly detect the color profile and dark background status for each, such as in a server-client situation.
fn my_little_handler():
# Create a renderer for the client.
renderer = mog.new_renderer()
# Create a new style on the renderer.
style = renderer.new_style().background(mog.AdaptiveColor(light=63, dark=228))
# render. The color profile and dark background state will be correctly detected.
style.render("Heyyyyyyy")
In addition to pure styling, Mog also ships with some utilities to help assemble your layouts.
Horizontally and vertically joining paragraphs is a cinch.
# Horizontally join three paragraphs along their bottom edges
join_horizontal(bottom, paragraph_a, paragraph_b, paragraph_c)
# Vertically join two paragraphs along their center axes
join_vertical(center, paragraph_a, paragraph_b)
# Horizontally join three paragraphs, with the shorter ones aligning 20%
# from the top of the tallest
join_horizontal(0.2, paragraph_a, paragraph_b, paragraph_c)Sometimes you’ll want to know the width and height of text blocks when building your layouts.
# render a block of text.
var style = mog.Style() \
.width(40) \
.padding(2)
var block string = style.render(some_long_string)
# Get the actual, physical dimensions of the text block.
width = mog.get_width(block)
height = mog.get_height(block)
# Here's a shorthand function.
var width = 0
var height = 0
width, height = mog.get_size(block)Sometimes you’ll simply want to place a block of text in whitespace.
# Center a paragraph horizontally in a space 80 cells wide. The height of
# the block returned will be as tall as the input paragraph.
block = place_horizontal(80, mog.center, fancy_styled_paragraph)
# Place a paragraph at the bottom of a space 30 cells tall. The width of
# the text block returned will be as wide as the input paragraph.
block = place_vertical(30, mog.bottom, fancy_styled_paragraph)
# Place a paragraph in the bottom right corner of a 30x80 cell space.
block = place(30, 80, mog.right, mog.bottom, fancy_styled_paragraph)Mog ships with a table rendering sub-package.
import mog.tableDefine some rows of data.
rows = List[List[String]](
List[String]("Chinese", "您好", "你好"),
List[String]("Japanese", "こんにちは", "やあ"),
List[String]("Arabic", "أهلين", "أهلا"),
List[String]("Russian", "Здравствуйте", "Привет"),
List[String]("Spanish", "Hola", "¿Qué tal?"),
)Use the table package to style and render the table.
t = table.new_table().
.border(NORMAL_BORDER) \
.border_style(mog.Style().foreground(mog.Color(99))) \
.headers("LANGUAGE", "FORMAL", "INFORMAL") \
.rows(rows)
# You can also add tables row-by-row
t.row("English", "You look absolutely fabulous.", "How's it going?")Print the table.
print(t)Here's an example table rendering!
- Decompose style render mega function and mega class into smaller ones.
- It seems like renderer.place_vertical renders whitespace with a width that's too long in the Ubuntu test container. Will need to investigate why this happened. It might be because the execution environment is not necessarily a terminal.
A Mojo HTTP framework with wings- @saviorand/lightbug_http