gst-switch has been deprecated in favor of voctomix.
All development effort is now going into voctomix.
gst-switch is a software based live video mixing and capture platform designed for fast, reliable and fault tolerant mixing, switching and capture. It is intended to replace expensive hardware mixing solutions needed when mixing HD video streams.
gst-switch was developed as a HD be a replacement of dvswitch.
- Use Ubuntu 14.04 (trusty)
- Check out code
- Run
build-min-trusty.sh - Run
run-demo.sh
gst-switch is split into multiple parts.
The video mixing is done in a server process which is controlled via an API available on DBUS.
Video and Audio is feed to the server using the gstreamer data protocol (GDP) over TCP sockets. The resulting mixed output is written to disk and can also be read out of the server again using GDP over a TCP socket.
The UI talks to the server via the API and displays the results. The UI is a totally separate process (which could run on a different machine) meaning that any crashes, stalls or other issues do not effect the mixing or recording.
The Python API exists to allow easy scripting on the server. It has functionality for controlling the starting and stopping of the server and video/audio feeds. It also can control the mixing, doing anything that the GUI can do. The Python API is used extensively for testing, but should also be useful for semi and full-automated mixing.
gst-switch is only tested on the current Ubuntu LTS.
It should work on other Linux versions which include the dependencies (such as Debian, RedHat, etc) but is not regularly tested on them.
gst-switch has minimal dependencies when used just for basic video switching.
The requirements are;
- A current version of gstreamer1.0. (Used to do all the actual hard work.)
- A current version of dbus. (Used to communicate between the server and UI.)
- A current version of gtk3.0 (Used for the GUI.)
The Python API is highly recommended but optional part of gst-switch. The Python API requirements are;
- python-gi (and thus gir1.2-glib-2.0 and libglib2.0-0). (Used to call gstreamer and dbus Python bindings.)
- python-scipy (Used to create and manipulate images.)
The test suite requirements are;
- pytest (including pytest-pep8 and pytest-cov)
- pylint
- ffmpeg or avconv command line tools (ffmpeg and libav-tools).
- FIXME: These should be removed and replaced with gst-launch commands.
There are some optional dependencies for the more advanced features like speaker tracking. FIXME: Add the dependency information here.
Either run the build-min-trusty.sh script or follow the instructions in the
file.
We are currently in the process of dropping support for Precise in preference of Trusty.
Ubuntu Precise does not ship with gstreamer1.0, so it needs to be build from
source. The scripts/install2.sh script will do this for you and then builds
gst-switch too.
gst-switch contains two parts, gst-switch-srv and gst-switch-ui
The gst-switch UI is a graphical controller for controlling the input streams. The UI must be started after the server is running.
Example gst-switch-ui command line;
gst-switch-ui- Left Click - Set video as primary video.
- Right Click - Set video as secondary video.
| Key | Function |
|---|---|
| R | Start recording to new file |
| Tab | Cycle composite modes |
| Esc | No composite mode |
| F1 or P | Compositing mode - Picture-in-Picture |
| F2 or D | Compositing mode - Side-by-side (preview) |
| F3 or S | Compositing mode - Side-by-side (equal) |
| A | When compositing, change the primary video |
| B | When compositing, change the secondary video |
| Up/Down | When compositing, select the video |
| Ctrl + Arrows | When compositing PIP, Adjust PIP position |
| Ctrl + Shift + Arrows | When compositing PIP, Adjust PIP size |
The gst-switch server will open at least three ports for video/audio input, and command controls.
Example gst-switch command line:
gst-switch-srvFIXME: Add examples of the recording and resolution options to the above example.
Once the gst-switch server is running, you will then need to feed the server audio and video streams. Helper scripts for doing this can be found in the XXXX directory.
FIXME: Add example feed information here.
Usage:
gst-switch-srv [OPTION...]
Help Options:
-h, --help Show help options
--help-all Show all help options
--help-gst Show GStreamer Options
Application Options:
-v, --verbose Prompt more messages
-t, --test-switch=OUTPUT Perform switch test
-r, --record=FILENAME Enable recorder and record into the specified FILENAME
-p, --video-input-port=NUM Specify the video input listen port.
-a, --audio-input-port=NUM Specify the audio input listen port.
-c, --controller-address=ADDRESS Specify DBus-Address for remote control, defaults to tcp:host=::,port=5000.
The default TCP port for video data is 3000.
Video data should be sent using gstreamer but there are multiple methods for doing so (see the sections below).
All video sent must be in the resolution the exact aspect ratio, resolution and frame rates the server was configured with when starting.
The color space / pixel format must be in I420. (This limitation comes from the usage of the inter gstreamer elements.)
You can use the following gstreamer plug-ins to convert the video on the sender's side;
-
videobox, to add borders or crop a video (thus changing the resolution or aspect ratio).
-
videoscale, to change the resolution of video via scaling.
-
videoconvert, to convert the pixel format and color space.
-
videorate, to adjust the frame rate (fps).
All video must be deinterlaced, use the following plug-ins to convert interlaced video on the sender's side;
-
deinterlace, the basic, well coded, stable, deinterlacer included in gstreamer-plugins-good.
-
avdeinterlace, the high performance and feature rich deinterlacer from libav (a fork of ffmpeg). Previously calledffdeinterlace.
FIXME: Put some example gst-launch-1.0 examples here.
FIXME: Write some example scripts which show gst-launch-1.0 usage for capturing from DV, v4l, decklink cards, etc.
FIXME: Put some Python API examples here.
gst-switch-cap is a custom program needed if you wish to use the speaker tracking functionality.
Example command line;
gst-switch-cap --device='/dev/ttyUSB0' --protocol='visca'FIXME: Actually make sure the tests cover the following formats listed below.
gst-switch is tested with the following video resolution;
- 300x200 - A low resolution only used in testing to increase test speed.
- 1024x768 - A 4:3 resolution almost universally supported by computers and projector equipment. Sometimes called XGA.
- 1280x720 - Lowest resolution 16:9 HD format, often called 720p.
- 1920x1080 - Most common 16:9 HD format, often called 1080p.
- 4096x2160 - Ultra HD format with 19:10 (1.9:1) aspect ratio. Sometimes called 4k video or 2160p. WARNING: Even the fastest computers struggle at this resolution!
gst-switch is tested with the following video frame rates;
- 24fps - Common "film" format.
- 25fps - "Full" frame rate of TV in PAL based countries (Europe, Australia, etc).
- 30fps - "Full" frame rate of TV in NTSC based countries (USA, Japan, etc).
- 60fps - Most common frame rate of computer monitors.
- 120fps - Frame rate of "High FPS" computer monitors and TVs.
The default audio input port is 4000.
Audio input must be in;
audio/x-raw
format: S16LE
rate: 48000
channels: 2
layout: interleaved
gst-launch-1.0 audiotestsrc is-live=true \
! audioconvert \
! audio/x-raw,rate=48000,channels=2,format=S16LE,layout=interleaved \
! gdppay \
! tcpclientsink port=4000
The default command control port is 5000.
FIXME: This is a DBUS port of some type?
This section lists the plug-ins used by gst-switch system.
FIXME: Generate this bit automagically. The following command line is kind of a start;
ack --type=cc "g_string_new|g_string_append" * | grep '"' | grep ".c" | sed -e's/.c:[^"]*"/ /' -e's/"[^"]*$//' | sort | uniq > outputtools/gstaudiovisual - Renders a video of the audio.
- FIXME: Is this GUI or server side?
- audioconvert
- videoconvert
- faad
- gdpdepay
- monoscope
- queue2
- tcpclientsrc
- tee
- textoverlay
- xvimagesink
tools/gstvideodisp - Displays the video on the screen.
- cairooverlay
- gdpdepay
- tcpclientsrc
- videoconvert
- xvimagesink
tools/gstswitchserver
- gdppay
- intervideosrc
- tcpserversink
tools/gstcase
- FIXME: What is this?
- faac
- gdpdepay
- gdpdepay
- gdppay
- giostreamsrc
- interaudiosink
- interaudiosrc
- intervideosink
- intervideosrc
- queue2
- tcpserversink
- tee
tools/gstcomposite - The actual mixer?
- FIXME: I'm sure there is probably more here...
- identity
- intervideosink
- queue2
- tee
The output format is an AVI file with VP8 (webm) video and faac audio.
tools/gstrecorder - Recording to disk.
- avimux
- voaacenc
- filesink
- gdppay
- interaudiosrc
- intervideosrc
- queue2
- tcpserversink
- tee
- vp8enc
tools/gstswitchcapture and tools/gstswitchptz
Everything under the tests/ directory
- audiotestsrc
- avidemux
- faad
- fakesink
- filesrc
- gdpdepay
- gdppay
- goom2k1
- monoscope
- tcpclientsrc
- textoverlay
- videoconvert
- videotestsrc
- xvimagesink
###The gst-switch PTZ
Implements Pan-Tilt-Zoom Camera controller UI.
gst-switch-ptz --device='/dev/ttyUSB0' --protocol='visca' --video='/dev/video0'FIXME: Remove this tool and put it into a gst-plugins-ptz repository with the associated plug-ins.
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
Full text of the GNU General Public License can be found in the COPYING file or at the following URL http://www.gnu.org/licenses/gpl-3.0.html.