An application to monitor and display soil moisture content for drip irrigation.

A plant monitoring and logging application using LilyGO-TTGO-THigrow device. It provides HomeAssistant integration, live measurements on internal page, configuration portal to setup, record log files, mqtt support for recording measurements.

Raspberry Pi monitoring system offering: live video transmission recording the stream using UV4L, reading door, window, motion, temperature, humidity, pressure sensors, presentation of their values and sending their states to the Zabbix server. It also offers a weather station: wind speed and direction meter, rainfall meter

Kiwi monitor is an open source CO2/Humidity/Temperature sensor intended for monitoring the quality of the air in a room. Kiwi was created to support teachers with a notification to ventilate their classroom.

A small battery-powered BLE temperature and humidity sensor with Android app.

Measure the temperature in your room!

World's smallest and lowest cost PoE-powered data room environmental monitor

Shelly humidity sensor exporter for prometheus

This is the Arduino library for the Texas Instruments HDC2080 temperature & humidity sensor

In this project, we will develop a system that monitors the temperature, humidity, smoke leakage, current voltage, and vibration of the server room via an Arduino IoT dashboard. In addition to attempting to detect and alert for Power Failure, Fire, Smoke, etc., this system will also integrate automation at the edge level for temperature control.

Originally designed to control the heat and light for a germination and grow station for my succulents mimicing the seasonal conditions anywhere in the world. The upside is that it will also control a full sized grow installation, hydroponics station and even a reptile vivarium.

Collect data from SwitchBot devices and the OpenWeatherMap API and log the data (temperature, humidity, and absolute humidity) to a Google Sheets document.

Temperature monitoring project. Android app: https://github.com/fartem/android-remote-temperature-control-client

An unofficial command line tool for working with Elitech data logging devices.

Frontend for https://github.com/bassages/home-server

Humidity & Temperature CLI datalogger for DHT22 sensor on Raspberry Pi.

I developed the Egg Incubator Project using an Arduino to maintain optimal hatching conditions with temperature and humidity control, and periodic egg turning. With a 100% hatch rate, this incubator features a DHT11 sensor, stepper motor for egg turning, LCD display for status, and buzzer alerts for critical conditions.

A project to help you maintain the health of a terrarium

Build a network of DHT sensors with auto detect using the ESP8266WiFi