Grbl-Advanced is a no-compromise, high performance, low cost alternative for CNC milling. This version of Grbl runs on a STM32F411RE / STM32F446RE Nucleo Board. Now with backlash compensation, multi-axis and Tool Table support!

JBC_SolderingStation

Device communication through RS-485 Modbus-RTU with CRC16 and HMI display for STM32

STM32F446RE-NUCLEO STemWin demo 320*240px LCD ILI9341 driver

BLDC Controller using STM32 Nucleo board and X-NUCLEO-IHM08M1

In this project, the Bosch BMP280 sensor is integrated with an STM32 microcontroller using bare-metal, low-level register-based firmware. Communication is handled via I2C and SPI protocols. The firmware captures sensor data and outputs it to a 16x2 LCD display, demonstrating effective real-time data acquisition and display.

Basic examples of STM32 ARM bare-metal programming. No high level libraries or IDE. Pure C. It's still in progress.

Port of Marlin for STM32 F4 MCU. More specifically STMF446RE and STM32F407VE.

VS1053/63 STM32 Example

O projeto Estufa Automática tem por objetivo desenvolver três estufas, medindo e atuando sobre a temperatura, luminosidade e umidade do solo. Essa implementação fará uso do protocolo MQTT, tornando as estufas em objetos virtuais para IoT, o que permitirá um controle à distância das estufas (que estarão colocadas em duas cidades) e,além disso, pe…

SSD1306 OLED Controller Driver for STM32F446xx MCUs.

This repository host the firmware based on HAL library and using STM32CubeIDE as the IDE for reading the internal temperature sensor using ADC.

Here i post programs for STM Boards

Use WSL/WSL2 with Linux (Ubuntu) and VSCode on Windows to program an STM32F4 board.