Serial Enabled LCD Backpack (LCD-00258)
This PIC-based serial enabled LCD backpack allows you to control a parallel based LCD over a single-wire serial interface. It is compatible with 16x2 LCDs and 20x4 LCDs.
- /Firmware
- /Arduino_Examples - Arduino example code to control the PIC-based serial enabled LCD
- /Default_Firmware - Any default firmware on the PIC that the part ships with for different size LCD screens
- /Hardware - All Eagle design files (.brd, .sch, .STL)
- Hookup Guide - Basic hookup guide for the PIC-based serial enabled LCD backpack.
-
LCD-00258 - SparkFun Serial Enabled LCD Backpack
-
Built-In Serial Enabled LCD
- LCD-09067 - Built-In SparkFun Serial Enabled 16x2 LCD - White on Black 3.3V
- LCD-09066 - Built-In SparkFun Serial Enabled 16x2 LCD - Black on Green 3.3V
- LCD-09068 - Built-In SparkFun Serial Enabled 16x2 LCD - Red on Black 3.3V
- LCD-09395 - Built-In SparkFun Serial Enabled 16x2 LCD - Whote on Black 5V
- LCD-09568 - Built-In SparkFun Serial Enabled 20x4 LCD - Black on Green 5V
- LCD-09394 - Built-In SparkFun Serial Enabled 16x2 LCD - Red on Black 5V
The hardware is released under Creative Commons ShareAlike 4.0 International. The code is beerware; if you see me (or any other SparkFun employee) at the local, and you've found our code helpful, please buy us a round!
Distributed as-is; no warranty is given.