This repository is associated with the research collaboration program between Imperial College London
and Institut Teknologi Bandung
in the field of affordable medical devices based on soft robotics.
In this work we present a soft continuum manipulator with two actuated DOFs:
- Bending on an arbitrary plane (θ).
- Rotation of the bending plane with respect to a fixed reference frame (γ) (see Fig. 1).
Fig. 1. Two DOFs of the soft manipulator prototype.
In the medical application, the bending angle (θ) and the bending plane angle (γ) can be measured by attaching a sensor (e.g. electromagnetic tracking) to the tip of the robot. It has good capabilities to localize and visualize the instrument as it's navigated through the various anatomical tracts. However, the sensor is relatively expensive in the early stage of development, with estimated costs ranging from $5000 - $150,000 1, especially for lower and middle-income countries (LMIC). Therefore, this project will present affordable method to measure the angles of the robot by using the camera and OpenCV
.
(a) | (b) |
Fig. 2. Measurement setup with GoPro Hero 5: (a) concept design and (b) prototype.
Fig. 3. Measurement result of bending angle (θ).
(a) | (b) |
Fig. 4. Result from edge detector algorithm: (a) original image and (b) detected edge.
Footnotes
-
A. Menache, “1 - Motion Capture Primer,” in Understanding Motion Capture for Computer Animation (Second Edition), Second Edition., A. Menache, Ed. Boston: Morgan Kaufmann, 2011, pp. 1–46. doi: https://doi.org/10.1016/B978-0-12-381496-8.00001-9. ↩