In the following examples will be showed the use of different libraries and protocols by the ESP8266 using Arduino Core and Arduino IDE

• Follow the Installation Process in Arduino Core Documentation
• Make sure that the OS has the drivers to use the USB-UART adaptor
  • If using macOS can install this software

• ESP8266 has to be set in BOOTLOADER mode, for this to happen the ESP8266 needs to be powered up with GP 0 pin set to "ground" in order to set it in BOOTLOADER mode.
  • If you have a firmware already uploaded you can confirm that the Wi-Fi module is ready to receive a new firmware due to "Serial Logs" absence.
  • In some cases you will see some errors like "espcomm_upload_mem failed" twice this could be the ESP9266 is not set in BOOTLOADER mode.
  • Always make sure that in Tools/Port of the Arduino IDE you have selected the USB Port that has connection to the Wi-Fi module.
    • In Linux (Ubuntu in this case)or macOS could exist "lack of permissions to use the USB port", in that case you will see an error like "espcomm_open failed" and "espcomm_upload_mem failed". In that case the next command has to be executed every time that you plan to set a new firmware using the Serial Port "sudo chmod -R 777 /dev/ttyUSB0" (if using Ubuntu) or "sudo chmod 777 /dev/tty.SLAB_USBtoUART" (if using macOS) changing "ttyUSB0" for you actual serial port with connection to the ESP8266

• dweet.io
  • To learn about Dweet visit the website.
  • To see a way of how to implement review the next example.
• API Gateway
  • To use API Gateway from the ESP8266 side is only necessary to use WiFiClientSecure library for HTTPS communication.
  • A deployment of API Gateway will be needed in order to test the functionality.
  • To see a way of how to implement review the next example.
• AWS IoT Core
  • Use of AWS-SDK for ESP8266 for use of IoT Core.
  • To see a way of how to implement review the next example.
• S3
• MQTT Mosquitto Broker
• WebSockets Communication
• Internal Web Server and access using RESTful APIs

• DNS
• NTP
• HTTP
• HTTPS
• MQTT
  • MQTT Essentials
  • pubsubclient as the library for MQTT use in ESP8266 with Arduino IDE
    • MIT Licence
• WebSockets
  • Websockets Tutorial
  • Websockets Library for client and server implementation

• Ticker library is used to trigger functions every a certain time. Make sure to follow recomendations from ESP8266 Arduino Core.

• Follow OTA documentation on Arduino Core for understanding on how OTA Upgrade works and the several ways to do it.
• Read the following tutorial that acts as both example and documentation.
• Here can be found an Example Code plus a tutorial on how implement OTA functions and how to use them.

• SPIFFS stands for SPI Flash File System, and can be used in the ESP8266 to store files like certificates for secure communication.
• For information about how the File System works, itś limitations and how to implement ypur code visit here.
  • Information about your chip flash size can be obtained using ESP-specific SDK as hown in example.

• ESP8266_Datasheet
• ESP8266_Technical_Reference
• ESP8266_Documents

• Arduino Core for ESP8266 allows the use for ESP-specific APIs with the objective of get information from board and firmware, and trigger certain functionalities like deepsleep and measuring power supply voltage. The information on how to use these ESP-specific APIs can be found in Arduino Core Documentation.