Skip to content

Create replication agreements between 389DS server instances

License

Notifications You must be signed in to change notification settings

waratek/389ds-replication

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

42 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

389ds-replication

Ansible Galaxy

Configure replication between 389DS server (LDAP server) instances.

ansible-galaxy install lvps.389ds_replication

Requirements

  • Ansible version: 2.7 or higher
  • OS: CentOS 7

If Ansible does not support the ldap_attrs module you're using an old version of collections, but you can try version 1.0.x of this role.

Role Variables

Variable Default Description Can be changed Role
dirsv_replication_role Role of this server: 'supplier', 'consumer' or 'both' (master). Hub is not supported. No
dirsrv_uri "ldap://localhost" URI of the server to configure. Since this runs on the Ansible target, localhost should be fine. It's possible to set it to ldaps://localhost to use TLS on port 636. CSB
dirsrv_rootdn "cn=Directory Manager" Root DN ("administrator" account username) CSB
dirsrv_rootdn_password secret Password for root DN account CSB
dirsrv_use_starttls true Use StartTLS to connect to the server CSB
dirsrv_tls_certificate_trusted true True if TLS certificate is from a trusted CA, false if self-signed or from a private CA, unused if TLS is not used CSB
dirsrv_serverid default Server ID aka instance ID, e.g. if the server is installed in the dirsrv/slapd-example directory, "example" is the server ID CSB
dirsrv_suffix dc=example,dc=local Root suffix CSB
dirsrv_supplier_replica_id 1 Choose a number between 1 and 65534. Don't assign it to other servers or bad things may happen. No SB
dirsrv_consumer_uri "ldap://consumer.example.com:389/" Full URI, including port, that the supplier will connect to and perform replication by pushing changes No SB
dirsrv_replication_user_remote Replication Manager User account that exists on the consumer. The supplier will bind with this account to perform replication. "Replication Manager" means that the account is "cn=Replication Manager,cn=config" Yes SB
dirsrv_replication_user_password_remote Password for the replication user (Replication Manager) account Yes SB
dirsrv_replica_bind_method "PLAIN" Bind method that supplier uses to connect to the consumer (SIMPLE, PLAIN, SASL) Yes SB
dirsrv_changelog_max_age "10d" Sets the value of nsslapd-changelogmaxage Yes SB
dirsrv_replica_attributes_list "(objectclass=*) $ EXCLUDE authorityRevocationList accountUnlockTime memberof" Sets the value of nsds5ReplicatedAttributeList, the default of this variable is use throughout examples in the documentation Yes SB
dirsrv_replica_attributes_list_total "(objectclass=*) $ EXCLUDE accountUnlockTime" Sets the value of nsds5ReplicatedAttributeListTotal, the default of this variable is use throughout examples in the documentation Yes SB
dirsrv_replication_user Replication Manager User account to create on the consumer. This account will be used by the supplier to bind on this server (the consumer). "Replication Manager" means that the account will be created at "cn=Replication Manager,cn=config" Yes CB
dirsrv_replication_user_password Password for that account. Yes CB
dirsrv_begin_replication_immediately true Boolean, sets nsds5ReplicaEnabled to "on" or "off" in the replication agreement. This should be a safe: if you add a new server it won't start pushing its empty database to other servers in any case because they have a different generation ID and replication fails (see examples for more details), but if you want to be even safer or make some customizations to the replication agreement, set this to false No CB
dirsrv_consumer_referral_to_supplier "ldap://supplier.example.com:389/" Full LDAP URI including port. When a client tries to write to a consumer, which is read-only, it will redirect the client to this server (a supplier that can accept writes). Yes C

First of all choose if the server is a supplier, consumer or both and set dirsv_role accordingly. Then set the variables related to that: look in the Role column, C = Consumer, S = Supplier, B = Both.

Some variables cannot be changed once they are set, changing them will produce unexcpected results ranging from "nothing happens" to "the role fails". Some others (authentication details, suffix, etc...) should be set to the correct value for the server, can be changed as long as that makes sense, i.e. you can change dirsrv_rootdn_password if you've changed the root DN password so that this role can authenticate correctly, but changing dirsrv_suffix between one run and the other on the same server is pointless, unless you somehow managed to change the suffix in 389DS.

The following variables have the exact same name and meaning as in the 389ds-server role, so if you're using both roles in the same playbook you can define them just once:

  • dirsrv_rootdn
  • dirsrv_rootdn_password
  • dirsrv_tls_certificate_trusted
  • dirsrv_serverid
  • dirsrv_suffix

Dependencies

None.

But do keep in mind that this role expects 389DS to be already up and running, it only configures replication between existing servers.

Example Playbook

More examples, including 389DS installation from the ground up and the needed Vagrant configs to test them are available in the 389ds-examples repository.

Note that, usually, replication doesn't start immediately because the "replica generation" is different between the servers. This can be fixed with the "replica refresh" procedure, which is described for example in section 15.2.5 of the Administration Guide. You will need to perform it on suppliers or servers with role "both".

Basically, doing a "replica refresh" will forcefully push the database from one supplier to a consumer, replacing the previous consumer database: do this starting from one supplier and gradually moving toward the others, being careful to not replace a production database with the empty database of a server that has just been installed. When two servers have the exact same database, replication starts automatically and immediately.

The procedure is also exaplained in more details in the 389ds-examples repository.

Consumer and supplier

Configure the consumer first, this server will contain a read-only copy of the database:

- hosts: consumer
  become: true

  roles:
    -
      role: lvps.389ds_replication
      dirsrv_replica_role: consumer
      dirsrv_suffix: "dc=example,dc=local"
      dirsrv_uri: "ldap://localhost"
      dirsrv_rootdn_password: secret
      dirsrv_replication_user_password: foo # Will create cn=Replication Manager,cn=config with this password
      dirsrv_consumer_referral_to_supplier: "ldap://supplier.example.local:389/"

The configure the supplier, this server will accept writes and push all changes to the consumer:

- hosts: supplier
  become: true

  roles:
    -
      role: lvps.389ds_replication
      dirsrv_replica_role: supplier
      dirsrv_suffix: "dc=example,dc=local"
      dirsrv_uri: "ldap://localhost"
      dirsrv_rootdn_password: verysecret
      dirsrv_replication_user_password_remote: foo # Will bind with cn=Replication Manager,cn=config and this password on the other server
      dirsrv_consumer_uri: "ldap://consumer.example.local:389/" # The other server (the consumer defined above)
      dirsrv_supplier_replica_id: 123

Multi-master with two masters

- hosts: mm1
  become: true
  roles:
    -
      role: lvps.389ds_replication
      dirsrv_replica_role: 'both'
      dirsrv_suffix: "dc=example,dc=local"
      dirsrv_uri: "ldap://localhost"
      dirsrv_rootdn_password: secret1
      dirsrv_replication_user_password: "aaaaaa"
      dirsrv_replication_user_password_remote: "bbbbbb" # On the other server
      dirsrv_consumer_uri: "ldap://mm2.example.local:389/" # The other server
      dirsrv_supplier_replica_id: 1
- hosts: mm2
  become: true
  roles:
    -
      role: lvps.389ds_replication
      dirsrv_replica_role: 'both'
      dirsrv_suffix: "dc=example,dc=local"
      dirsrv_uri: "ldap://localhost"
      dirsrv_rootdn_password: secret2
      dirsrv_replication_user_password: "bbbbbb"
      dirsrv_replication_user_password_remote: "aaaaaa" # On the other server
      dirsrv_consumer_uri: "ldap://mm1.example.local:389/" # The other server
      dirsrv_supplier_replica_id: 2

Known bugs

If dirsrv_replication_user_password is changed, no change is reported: this is because password actually changes on every run (Ansible can't tell if the previous hashed password is the same as the new one, so it will be changed and hashed again), but there's a changed_when: false to hide that detail.

License

MIT.

About

Create replication agreements between 389DS server instances

Resources

License

Stars

Watchers

Forks

Packages

No packages published