wt32sc01

[WIP] My ESP-IDF LVGL project for WT32-SC01 with LVGL 7 demo

How to burn to WT32-SC01

• WT32-SC01 v3.2, ESP32-WROVER B.
• When white english 'WT32-SC01' is north, connect
  bottom pins first row left 3 (pin 6)
  to first row left 12 (pin 24).
• After burnning, connect
  bottom pins first row left 2 (pin 4) to first row left 12 (pin 24).
• If burn, use: idf.py flash, after burn, need to press RESET button on board
• If build, use: idf.py build
• Tested under esp-idf 4.4.3 (4.3 may be ok)
• If install ESP-IDF for windows, see https://dl.espressif.cn/dl/esp-idf/
• This screen (3.5inch, 480x320 with touch) is not very good, may be slow and too small, I don't recommand it and WT32-SC01-PLUS

Ref

• Wireless-Tag, ESP-IDF LVGL 8 widgets demo version
  https://github.com/wireless-tag-com/WT32-SC01
• https://github.com/wireless-tag-com/8ms-esp32
• https://search.gitee.com/?q=wt32-sc01&type=repository

WT32-SC01-PLUS (with ESP32-S3) ref, not for WT32-SC01

• not for WT32-SC01: https://github.com/wireless-tag-com/ZX3D50CE02S