xtruder/homelab

My personal setup for homelab, just a bunch of services deployed with docker-compose and make

Server deployment

Follow guide on Installing fedora CoreOS on Bare Metal

1. Download FCOS ISO

podman run --security-opt label=disable --pull=always --rm -v .:/data -w /data \
    quay.io/coreos/coreos-installer:release download -s stable -p metal -f iso

Burn ISO to USB drive or mount it via piKVM to server

2. Install FCOS

Reboot server and boot from USB drive

Run following command to install FCOS

sudo coreos-installer install --ignition-url https://github.com/xtruder/homelab/raw/main/ignition/jarvis.ign /dev/sdX

3. Reboot server

Reboot server to apply changes

sudo reboot

After reboot the server will automatically be rebased to ucore server image, this will cause server to restart twice.

4. Enroll ublue secure boot keys

sudo mokutil --import /etc/pki/akmods/certs/akmods-ublue.der
sudo reboot

During reboot you will be asked to enroll secure boot keys, select enroll and enter password.

Setup user

1. Create host ssh key and add it as deploy key to github:

ssh-keygen -t ed25519
cat ~/.ssh/id_ed25519.pub

Add key to: https://github.com/xtruder/homelab/settings/keys

3. Clone and apply dotfiles

git clone git@github.com:xtruder/homelab.git ~/homelab
chezmoi init --apply --sourceDir ~/homelab

4. Reload systemd daemon and enable linger

systemctl --user daemon-reload
sudo loginctl enable-linger $(whoami)

To pause automatic deployments create .working file and it will docker reloads