Skip to content

zaikuto/pyamlboot

 
 

Repository files navigation

pyamlboot: Amlogic SoC USB Boot utility

The Amlogic SoCs have a USB Boot mode setting itself in USB Gadget mode with a custom protocol.

The protocol reverse engineering can be found in the PROTOCOL.md file.

A library pyamlboot provides all the calls provided by the USB protocol, and the boot.py permit booting from the SoC ROM in USB Boot mode.

Installation

From PyPi

pip3 install pyamlboot

From GitHub master branch

pip3 install git+https://github.com/superna9999/pyamlboot

For development

git clone https://github.com/superna9999/pyamlboot

S905X2/S905D2/S905X3/S905D3/A311D/S922X Protocol

The G12A, G12B & SM1 uses a specific USB Boot protocol, implemented in the boot-g12.py tool.

Supported Boards

  • Odroid-C4, N2, N2+

The Micro USB is used to communicate with the Boot ROM.

Switch the N2 in eMMC mode, and remove eMMC & SDCard. Remove eMMC & SDCard of Odroid-C4.

  • Khadas VIM3/VIM3L

The USB-C is used to power and communicate with the Boot ROM.

Follow https://docs.khadas.com/vim3/HowtoBootIntoUpgradeMode.html#TST-Mode-Recommended

Command

usage: boot-g12.py [-h] [--version] binary

USB boot tool for Amlogic G12 SoCs

positional arguments:
  binary         binary to load

optional arguments:
  -h, --help     show this help message and exit
  --version, -v  show program's version number and exit

The G12 protocol doesn't permit loading Linux & a ROOTFS from memory, please setup U-Boot to load Linux & a ROOTFS by Ethernet or Fastboot via USB or Ethernet.

sudo ./boot-g12.py /path/to/u-boot.bin

The u-boot.bin is the file generate by the Amlogic Tools after the mkboot stage.

S905X/S912/A113D Protocol

The GXL, GXM & GXBB uses a specific USB Boot protocol, implemented in the boot.py tool.

Supported Boards

  • Libretech-CC (Le Potato)

Remove the SDCard & eMMC Connect a Serial2USB cable to the UART pins to see the boot log Connect a USB Type-A to Type-A cable to the top USB Connector right next to the Ethernet connector

Plug into this USB port
        \/
  ___   __   __
 |   | |__| |__|
 |___| |__| |__|
-----------------
  • Libretech-AC (La Frite)

Remove the eMMC & erase the SPI Flash first sectors. Connect a Serial2USB cable to the UART pins to see the boot log Connect a USB Type-A to Type-A cable to the top USB Connector right next to the Ethernet connector

Plug into this USB port
         \/
    __   __
---|  |-|  |-----
|             ::|
|             ::|
|             ::|
|             ::|

  • Khadas VIM & VIM2

The USB-C is used to power and communicate with the Boot ROM.

For Khadas-VIM, follow https://docs.khadas.com/vim1/HowtoBootIntoUpgradeMode.html#TST-Mode-Recommended

For Khadas-VIM2, follow https://docs.khadas.com/vim2/HowtoBootIntoUpgradeMode.html#TST-Mode-v1-4-only

Command

usage: boot.py [-h] [--version] [--board-files UPATH] [--image IMAGEFILE] [--script SCRIPTFILE]
               [--fdt DTBFILE] [--ramfs RAMFSFILE]
               {khadas-vim3,q200,libretech-ac,s400,khadas-vim2,libretech-cc,khadas-vim}

USB boot tool for Amlogic

positional arguments:
  {khadas-vim3,q200,libretech-ac,s400,khadas-vim2,libretech-cc,khadas-vim}
                        board type to boot on

optional arguments:
  -h, --help            show this help message and exit
  --version, -v         show program's version number and exit
  --board-files UPATH   Path to Board files (default: None)
  --image IMAGEFILE     image file to load (default: None)
  --script SCRIPTFILE   script file to load (default: None)
  --fdt DTBFILE         dtb file to load (default: None)
  --ramfs RAMFSFILE     ramfs file to load (default: None)

Example from a Linux build directory:

sudo ./boot.py --image arch/arm64/boot/Image --fdt arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dtb --ramfs /path/to/rootfs.cpio.uboot --script boot.scr libretech-cc

Replace le board name, here libretech-cc by the board you want to boot.

A cpio initramfs in uboot format as rootfs.cpio.uboot is used in the example, can be built using Buildroot.

Eventually change boot.cmd to add more commands before booting linux

If boot.cmd changed, run :

mkimage -C none -A arm -T script -d boot.cmd boot.scr

Releases

No releases published

Packages

No packages published

Languages

  • Python 99.2%
  • Batchfile 0.8%