Skip to content

Simple bone dynamics custom node for Autodesk Maya.

License

Notifications You must be signed in to change notification settings

zero5zc/boneDynamicsNode

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

37 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

boneDynamicsNode

Maya License: MIT
A custom node that applies dynamics to one section of a joint chain. It can be included directly into the rig, or Bake & Purge over the rig.

Warning
Internal Use ID 0x7b001 is used.

Installaion

  1. Put boneDynamicsNode.mll in C:\Users\<USERNAME>\Documents\maya\<MAYAVERSION>\plug-ins.
  2. Load "boneDynamicsNode.mll" from Plug-in Manager.

Basic Usage

Create any joint chain and connect the boneDynamicsNode per section. The minimum required connections are as follows:

Required Connections

  • Time
  • Bone Translate
  • Bone Joint Orient
  • Bone Parent Matrix
  • Bone Parent Inverse Matrix
  • End Translate
  • Output Rotate

To rotate joint1, with joint2 as the tip...

required_connections

Let's move the current frame to 1 or later and move the root. The joint-chain shakes!

basic_usage

💡Requirements for Joint
Joint chain must meet the requirements here.

💡Sample Script
basic_usage.py is a script to connect bonedynamicsNode to any joint chain. Please select and execute them in order from the root of the joint to the tip of the joint.

Attributes to Check

  • Enable : Turning it off disables all calculations.
  • Reset Time : Dynamics are disabled when the current frame is equal to or less than this value. In other words, start frame of the simulation.
  • Fps : Used to calculate delta time. Enter a value equal to the FPS of the scene. Default is 30.

Dynamics Attributes

  • Damping : Attenuates speed. The larger the value, the harder it is to accelerate.
  • Elasticity : Force to return to the original posture.
  • Stiffness : Suppresses changes between frames (steps). Setting to 1 will result in loss of motion.
  • Mass : Affects the force to return to the original posture.
  • Gravity : If Y-up and the unit is in centimeters, set [0,-980,0].
  • Gravity Multiply : Will be multiplied by Gravity.

Bake to Keyframes

Select the joint and execute "Bake Simulation" from the "Key" menu. Then delete the boneDynamicsNode.

Requirements for Joint

  • Rotate should be [0,0,0], with only the Joint Orient having a value.
  • Do not edit rotatePivot, rotatePivotTranslate, scalePivot, or scalePivotTranslate.
  • Rotate Order is only available for xyz.
  • Rotate Axis should remain [0,0,0].
  • Leave Inherits Transform checked.
  • Leave Offset Parent Matrix at its default value.
  • Receive InverseScale from the parent Scale and leave Segment Scale Compensate checked. Shear not supported.

All of the above checkpoints can be satisfied by making joints as usual.

Features

Collisions

5 types of collisions are available: Sphere, Capsule, Infinite plane, Mesh, and Ground.

  • Radius : Radius of the end-joint.
  • Iterations : Higher values increase the accuracy of collisions. Recommended value is 3 to 5. 0 disables collisions.

Collisions are determined by the sphere centered around the end-joint. The radius of the end-joint is set with the Radius attribute.

radius

The attributes that connect the collider are in a list, so you can use more than one. Ground Collision does not need connections.

collider_connections

💡Visualize Radius
Place a nurbsSphere or implicitSphere as a child of end-joint and connect Radius.
visualize_radius

Sphere, Capsule, Infinite plane

collisions

The required connections for these three types of collisions are as follows.

  • Sphere Col Matrix : Connect the sphere collider worldMatrix.
  • Sphere Col Radius : Radius of sphere collider.
  • Capsule Col Matrix A Capsule Col Matrix B : Connect worldMatrix on one side of the capsule collider.
  • Capsule Col Radius A Capsule Col Radius B : Connect the radius of one side of the capsule collider.
  • Infinite Plane Col Matrix : Connect worldMatrix of infinite plane collider.

💡Note
Colliders can be created with maya_expressionCollision (expcol), but it is not necessary to use it. Any collider can be used as long as the required attributes are connected.
collider_note

Mesh (*Experimental)

mesh_collision

Any mesh can be used for collisions. Compared to other types of collisions, mesh collisions are more loaded and less stable, so their use is not recommended.

  • Mesh Collider : Connect worldMesh of any mesh.
  • Mesh Col Cutoff : Max distance for mesh collision detection.

💡Note

  • As this is an experimental feature, it may be unstable.
  • All edges of the collision mesh should be made with soft edges.
  • If the collision mesh has a large number of polygons, it will increase the processing load.
  • If the collision mesh is not a closed shape, use Mesh Col Cutoff to control the range of detections.

mesh_col_cutoff

Ground

ground_collision

A horizontal infinite plane collision. It can be used only with the enable and ground height attribute, no connections are needed.

  • Enable Ground Col : Enable ground collision.
  • Ground Height : Height of the ground.

Angle Limitation

The Angle Limit attribute allows for limiting the rotation angle of bones. It has a higher priority than collision, so depending on the posture, it may be penetrated in the colliders.

angle_limit

💡Visualize Angle
Place an implicitCone node and a transform nodes in the same space as the joint, and set and connect their attributes as in the following image:
visualize_angle
⚠️If joint.ty and tz contain values, cone direction will not match accurately.

Specify Target Pose

The converging pose can be manipulated by duplicating the joint-chain and connecting Rotate to Rotation Offset.

rotation_offset

rotation_offset_connections

Offset Transform

You can cancel the transform by connecting the worldMatrix of the node you do not want affected (such as the root controller of character) to the Offset Matrix.

offset_matrix

offset_matrix_connections

Supports Scale per Section

Connecting each scale value to Bone Scale, Bone Inverse Scale, and End Scale enables a scale per section.

⚠Please avoid non-uniform scales.

scale

scale_connections

Branching

branching

Branching is possible, but good results are obtained with joints like the one on the left of the image. The right one does not give good results.

branching_skeleton

💡Sample Script
advanced_usage.py is a script to connect bonedynamicsNode to any joint chain. Please select and execute them in order from the root of the joint to the tip of the joint.

  • Enable per-section scaling.
  • If place the collider created by expcol as a child of 'collider_grp', to be connected.
  • If duplicate the joint-chain to be simulated and add '_target' to the end of the name, to allow manipulation of the target posture.
  • If a node named "offset" exists, will be connected to cancel the transform.

Pre-built plug-ins

Pre-built boneDynamicsNode.mll in the plug-ins folder. Install to the appropriate Maya version and ready to use.

Version Plug-in
(*Click on "Download raw file" at the link.)
Maya 2022 Update 5 win64 Download
Maya 2023 Update 3 win64 Download
Maya 2024 Update 2 win64 Download
Maya 2025 Update 1 win64 Download

How to Build

For example, Maya 2024 in Windows:

  1. Install Visual Studio 2022
  2. Install CMake 3.22.1 or higher
  3. Donwload SDKs from Maya API | Autodesk Platform Services (APS)
  4. Set devkitBase path in the DEVKIT_LOCATION environment variable.
  5. Generate a project with the following command:
cd src
cmake . -Bbuild_2024 -G "Visual Studio 17 2022" -A x64
  1. Build with Visual Studio or with the following command:
cmake --build build_2024

Links

About

Simple bone dynamics custom node for Autodesk Maya.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C++ 78.9%
  • Python 20.5%
  • CMake 0.6%