Skip to content

"hidden menus" key combinations

harman-f edited this page Jun 18, 2022 · 15 revisions

ℹ️ Red Engineering Menu/Service Mode menu can always be entered. GreenEngineering Menu and other functions are only available AFTER Development Mode is enbaled on unit. This is done by M.I.B during installation. Hence they will be available after M.I.B installation.

VW, SKODA, SEAT

ℹ️ Depending on brand and car model buttons will be placed different around the screens. But they will always be clearly labled.

Function Shortcut Additional Info
Service Mode menu MENU for 3 seconds
Testmode menu MENU for 10 seconds DEV Mode has to be enabled 📹LINK
Screenshot to SD card MEDIA for 3 seconds DEV Mode has to be enabled - “bling” sound confirms screenshot
Reboot Volume Wheel for 10 seconds “hard” reboot some changes to coding or adaptions might be lost, especially when using M.I.B or MIB-Toolbox

AUDI

ℹ️ Please note: You have to press these key combinations while you are on HOME screen!

grafik

Model REM (Red Engineering Menu) GEM (Green Engineering Menu) Reboot Screenshot
A4/A5/Q5 2017-2020 grafik grafik grafik grafik
A4 (8W) manual geaerbox grafik grafik grafik grafik
TT/R8/A3 -2016/2020 grafik grafik grafik grafik
A3 2012-2016 grafik   grafik grafik
Q7 MY 2014-2020 grafik grafik grafik grafik
A6/A7 MY 2015-2018 grafik grafik grafik grafik

PORSCHE

ℹ️ Please note: Follow key order press button (1) and button (2) quickly after
Alternatively you can also both press buttons at the same time for ~5s.
ℹ️ Please note: You have to press these key combinations while you are on HOME screen!

grafik

POG11

grafik

POG24

grafik

ℹ️ Key combination for screenshot was not discovered yet.

BENTLEY

ℹ️ Please note: You have to press these key combinations while you are on HOME screen!

BYSUV

grafik

ℹ️ Key combination for screenshot was not discovered yet.

BYG24

image

ℹ️ Key combination for screenshot was not discovered yet.

Screenshots to SD

VW/SKODA/SEAT

Screenshots are directly copied to root of SD card

AUDI/PORSCHE/BENTLEY

The screenshots are saved on the hard disk of the MMI/PCM unit. In order to copy the screenshots to SD card 1, a function in GEM has to be used.

Carry out the following steps:

  • Select "production"
  • Select "debugging_prod"
  • Select "Copy MMX / RCC CoF, ErL & ScS (only AU) to SD1"
  • wait until the copying process is finished ("Copying files to ... done")

The screenshots (and log files) are now on the card in SD1, in a directory (e.g. 01_Export_20160913_115634).