SWDLClient Error Code tables

ℹ️ Especially section 2. Filecopy specific errors are normally related to bad FW SD, meaning:

• bad partition on SD → format again FAT32
• missing files → bad FW archive or skipped files during copying to SD
• damaged SD card! → this one is very often the case

⚠️ Always get a 2nd SD just in case something is wrong!
And yes, also brand new SD cards can be bad!

1. Device specific errors

1.1 Cinterion Errors

Error Code	Error Description
128	SHA1 checksum error! Please verify data on your download medium.[SWDL_ERROR_SHA1]
150	Inialization failed[SWDL_ERROR_CINTERION_INIT]
151	Transfer error while flashing device[SWDL_ERROR_CINTERION_TRANSFER]
152	Path could not be found[SWDL_ERROR_CINTERION_SET_PATH]
153	Firmware stat/fstat error[SWDL_ERROR_CINTERION_STAT_FILE]
154	ASI connection is broken[SWDL_ERROR_CINTERION_CONNECTION]
155	Module infos could not been correctly retrieved[SWDL_ERROR_CINTERION_MODULE_INFO]

1.2 DVD Errors

Error Code	Error Description
128	SHA1 checksum error! Please verify data on your download medium.[SWDL_ERROR_SHA1]
150	Flash process failed[SWDL_ERROR_FLASHFAILED]

1.3 MMX2 Errors

Error Code	Error Description
128	SHA1 checksum error! Please verify data on your download medium.[SWDL_ERROR_SHA1]
150	Could not save update info from emergency[SWDL_ERROR_SAVEUPDATEINFO]
151	Could not remove update info from emergency[SWDL_ERROR_REMOVEUPDATEINFO]
152	MMX emergency image is not correct flashed. Select module MMX2/eifs again[SWDL_ERROR_NO_MMX_EMERGENCY_IMG]
153	RCC emergency image is not flashed or is corrupted.[SWDL_ERROR_NO_RCC_EMERGENCY_IMG]
154	Quickboot recovery is not operable. Select MMX2/qb_recovery to flash next time.[SWDL_ERROR_QB1_INVALID]
155	Quickboot primary is not operable. Select MMX2/qb_primary to flash next time.[SWDL_ERROR_QB2_INVALID]
156	nvTools function error[SWDL_ERROR_NVTOOLS]

1.4 Generic Errors

Error Code	Error Description
220	Not enough memory to allocate[SWDL_ERROR_MALLOC]
221	Memory comparison failed[SWDL_ERROR_MEMCMP]
222	Driver has returned an error[SWDL_ERROR_DRIVER]
223	Partition group sanity check failed! Android header for Primary Group (mifsstage1/mifs-stage2/app/efs-system) or Recovery Group (eifs/qb) is not correct[SWDL_ERROR_GROUP]
224	Cannot find partition or determine partition properties (stat)[SWDL_ERROR_PARTITION]
225	Unable to start thread[SWDL_ERROR_THREAD]
226	Most unlock detected. Waiting for most lock[SWDL_ERROR_MOST]
227	Error in container state corrupt data or MOST unlock[SWDL_ERROR_CONTAINER_GENERIC]
228	Error in container version information: Upgrade to another version first![SWDL_ERROR_CONTAINER_VERSION]
229	Timeout for getting next block waiting for data[SWDL_ERROR_IMG_GET]
230	Error writing image block[SWDL_ERROR_IMG_WRITE]
231	Could not find image file[SWDL_ERROR_FILENOTFOUND]
232	Could not open file through MOST[SWDL_ERROR_OPENFILE]
233	image file greater than target partition[SWDL_ERROR_FILESIZE]
234	Error while writing image to device. Please press retry.[SWDL_ERROR_WRITE]
235	Error seeking on device[SWDL_ERROR_SEEK]
236	Failed to mount partition[SWDL_ERROR_MOUNT]
237	Failed to unmount partition. Maybe device is busy.[SWDL_ERROR_UMOUNT]
238	Could not open local device[SWDL_ERROR_OPENDEV]
239	Could not prepare device for flashing[SWDL_ERROR_PREPARE]
240	Erasing device failed[SWDL_ERROR_ERASE]
241	Flash memory could not be unlocked[SWDL_ERROR_UNLOCK]
242	Temporary directory creation failed[SWDL_ERROR_MKDIR]
243	failed to change directory to temporary dir[SWDL_ERROR_CHDIR]
244	Could not remove temporary image[SWDL_ERROR_REMOVE]
245	Image file could not be renamed[SWDL_ERROR_RENAME]
246	Error while reading img file[SWDL_ERROR_READ]
247	Pre or post script could not be started[SWDL_ERROR_SCRIPTSTART]
248	Pre or post script returns an error[SWDL_ERROR_SCRIPTRETURN]
249	Script checksum error[SWDL_ERROR_SCRIPTCHECKSUM]
255	unknown error occured[SWDL_ERROR_UNKN]

2. Filecopy specific errors

Filecopy will be executed for the following packages:

• NavDB
• Speech
• Gracenote
• Truffles
• Eggnog,  Boardbook

2.1 FileCopy Errors

Error Code	Error Description
128	reserved[FC_ERRORS_BACKUP_BEFOR_COPY_OTHER_ERROR]
129	file/folder could not be removed[FC_ERRORS_DELETE_DEST_BEFORE_COPY_RMDIR_ERROR]
130	file version info write failed[FC_ERRORS_WRITE_FILE_INFO_OPEN]
131	could not create a folder[FC_ERRORS_CREATE_PATH]
132	rename TMP file/folder to destination file/folder has failed[FC_ERRORS_RENAME_TMP]
133	partition mount error[FC_ERRORS_MOUNT_FAILED]
134	file information could not be determined[FC_ERRORS_STAT]
135	checksumsize is zero[FC_ERRORS_CHECKSUMSIZE]
136	memory allocation error[FC_ERRORS_MALLOC]
137	source file is missing[FC_ERRORS_OPEN_SRC]
138	read error on source file[FC_ERRORS_READ_BLOCK]
139	sha1 checksum[FC_ERRORS_SHA1_CHECK1]
140	destination file write error[FC_ERRORS_WRITE_BLOCK]
141	reserved[FC_ERRORS_SHA1_CHECK2]
142	rename NEW file/folder to destination file/folder has failed[FC_ERRORS_RENAME]
143	hashes.txt could not be parsed[FC_ERRORS_HASH_PARSE]
144	thread not started[FC_ERRORS_THREAD_START]
145	checkpoint tag in metainfo has wrong size[FC_ERRORS_CHECKPOINT]
146	unexpected error[FC_ERRORS_OTHER]