Eclipse Zenoh

The Eclipse Zenoh: Zero Overhead Pub/sub, Store/Query and Compute.

Zenoh (pronounce /zeno/) unifies data in motion, data at rest and computations. It carefully blends traditional pub/sub with geo-distributed storages, queries and computations, while retaining a level of time and space efficiency that is well beyond any of the mainstream stacks.

Check the website zenoh.io and the roadmap for more detailed information.

---

Getting Started

Zenoh is extremely easy to learn, the best place to master the fundamentals is our getting started guide.

---

How to install it

To install the latest release of the Zenoh router (zenohd) and its default plugins (REST API plugin and Storages Manager plugin) you can do as follows:

Manual installation (all platforms)

All release packages can be downloaded from https://download.eclipse.org/zenoh/zenoh/latest/.

Each subdirectory has the name of the Rust target. See the platforms each target corresponds to on https://doc.rust-lang.org/stable/rustc/platform-support.html.

Choose your platform and download the .zip file. Unzip it where you want, and run the extracted zenohd binary.

Linux Debian

Add Eclipse Zenoh private repository to the sources list, and install the zenoh package:

echo "deb [trusted=yes] https://download.eclipse.org/zenoh/debian-repo/ /" | sudo tee -a /etc/apt/sources.list.d/zenoh.list > /dev/null
sudo apt update
sudo apt install zenoh

Then you can start run zenohd.

MacOS

Tap our brew package repository and install the zenoh formula:

brew tap eclipse-zenoh/homebrew-zenoh
brew install zenoh

Then you can start run zenohd.

---

Rust API

• Docs.rs for Zenoh

---

How to build it

Warning

Zenoh and its ecosystem are under active development. When you build from git, make sure you also build from git any other Zenoh repository you plan to use (e.g. binding, plugin, backend, etc.). It may happen that some changes in git are not compatible with the most recent packaged Zenoh release (e.g. deb, docker, pip). We put particular effort in maintaining compatibility between the various git repositories in the Zenoh project.

Install Cargo and Rust. Zenoh can be successfully compiled with Rust stable (>= 1.75.0), so no special configuration is required from your side. If you already have the Rust toolchain installed, make sure it is up-to-date with:

rustup update

To build Zenoh, just type the following command after having followed the previous instructions:

cargo build --release --all-targets

Zenoh's router is built as target/release/zenohd. All the examples are built into the target/release/examples directory. They can all work in peer-to-peer, or interconnected via the zenoh router.

---

Quick tests of your build

Peer-to-peer tests

• pub/sub

  • run: ./target/release/examples/z_sub
  • in another shell run: ./target/release/examples/z_put
  • the subscriber should receive the publication.

• get/queryable

  • run: ./target/release/examples/z_queryable
  • in another shell run: ./target/release/examples/z_get
  • the queryable should display the log in its listener, and the get should receive the queryable result.

Routed tests

Note

Windows users: to properly execute the commands below in PowerShell you need to escape " characters as \".

• put / store / get

  • run the Zenoh router with a memory storage:

    ./target/release/zenohd --cfg='plugins/storage_manager/storages/demo:{key_expr:"demo/example/**",volume:"memory"}'

  • in another shell run:

    ./target/release/examples/z_put`

  • then run

    ./target/release/examples/z_get

  • the get should receive the stored publication.

• REST API using curl tool

  • run the Zenoh router with a memory storage:

    ./target/release/zenohd --cfg='plugins/storage_manager/storages/demo:{key_expr:"demo/example/**",volume:"memory"}'

  • in another shell, do a publication via the REST API:

    curl -X PUT -d '"Hello World!"' http://localhost:8000/demo/example/test

  • get it back via the REST API:

    curl http://localhost:8000/demo/example/test

• router admin space via the REST API

  • run the Zenoh router with permission to perform config changes via the admin space, and with a memory storage:

    ./target/release/zenohd --adminspace-permissions=rw --cfg='plugins/storage_manager/storages/demo:{key_expr:"demo/example/**",volume:"memory"}'

  • in another shell, get info of the zenoh router via the zenoh admin space (you may use jq for pretty json formatting):

    curl -s http://localhost:8000/@/local/router | jq

  • get the volumes of the router (only memory by default):

    curl -s 'http://localhost:8000/@/local/router/**/volumes/*' | jq

  • get the storages of the local router (the memory storage configured at startup on '/demo/example/**' should be present):

    curl -s 'http://localhost:8000/@/local/router/**/storages/*' | jq

  • add another memory storage on /demo/mystore/**:

    curl -X PUT -H 'content-type:application/json' -d '{"key_expr":"demo/mystore/**","volume":"memory"}' http://localhost:8000/@/local/router/config/plugins/storage_manager/storages/mystore

  • check it has been created:

    curl -s 'http://localhost:8000/@/local/router/**/storages/*' | jq

Configuration options

A Zenoh configuration file can be provided via CLI to all Zenoh examples and the Zenoh router.

• -c, --config <FILE>: a JSON5 configuration file. DEFAULT_CONFIG.json5 shows the schema of this file and the available options.

See other examples of Zenoh usage in examples/

Note

Zenoh Runtime Configuration: Starting from version 0.11.0-rc, Zenoh allows for configuring the number of worker threads and other advanced options of the runtime. For guidance on utilizing it, please refer to the doc.

---

Zenoh router command line arguments

zenohd accepts the following arguments:

• --adminspace-permissions <[r|w|rw|none]>: Configure the read and/or write permissions on the admin space. Default is read only.

• -c, --config <FILE>: a JSON5 configuration file. DEFAULT_CONFIG.json5 shows the schema of this file. All properties of this configuration are optional, so you may not need such a large configuration for your use-case.

• --cfg <KEY>:<VALUE>: allows you to change specific parts of the configuration right after it has been constructed. VALUE must be a valid JSON5 value, and key must be a path through the configuration file, where each element is separated by a /. When inserting in parts of the config that are arrays, you may use indexes, or may use + to indicate that you want to append your value to the array. --cfg passed values will always override any previously existing value for their key in the configuration.

• -l, --listen <ENDPOINT>...: An endpoint on which this router will listen for incoming sessions. Repeat this option to open several listeners. By default, tcp/[::]:7447 is used. The following endpoints are currently supported:

  • TCP: tcp/<host_name_or_IPv4_or_IPv6>:<port>
  • UDP: udp/<host_name_or_IPv4_or_IPv6>:<port>
  • TCP+TLS: tls/<host_name>:<port>
  • QUIC: quic/<host_name>:<port>

• -e, --connect <ENDPOINT>...: An endpoint this router will try to connect to. Repeat this option to connect to several peers or routers.

• --no-multicast-scouting: By default zenohd replies to multicast scouting messages for being discovered by peers and clients. This option disables this feature.

• -i, --id <hex_string>: The identifier (as an hexadecimal string - e.g.: A0B23...) that zenohd must use. WARNING: this identifier must be unique in the system! If not set, a random unsigned 128bit integer will be used.

• --no-timestamp: By default zenohd adds a HLC-generated Timestamp to each routed Data if there isn't already one. This option disables this feature.

• -P, --plugin [<PLUGIN_NAME> | <PLUGIN_NAME>:<LIBRARY_PATH>]...: A plugin that must be loaded. Accepted values:

  • a plugin name; zenohd will search for a library named libzenoh_plugin_<name>.so on Unix, libzenoh_plugin_<PLUGIN_NAME>.dylib on MacOS or zenoh_plugin_<PLUGIN_NAME>.dll on Windows.
  • "<PLUGIN_NAME>:<LIBRARY_PATH>"; the plugin will be loaded from library file at <LIBRARY_PATH>.

  Repeat this option to load several plugins.

• --plugin-search-dir <DIRECTORY>...: A directory where to search for plugins libraries to load. Repeat this option to specify several search directories'. By default, the plugins libraries will be searched in: '/usr/local/lib:/usr/lib:~/.zenoh/lib:.'

• --rest-http-port <rest-http-port>: Configures the REST plugin's HTTP port. Accepted values:

  • a port number
  • a string with format <local_ip>:<port_number> (to bind the HTTP server to a specific interface)
  • "None" to deactivate the REST plugin

  If not specified, the REST plugin will be active on any interface ([::]) and port 8000.

---

Plugins

Warning

As Rust doesn't have a stable ABI, the plugins should be built with the exact same Rust version as zenohd, and using for zenoh dependency the same version (or commit number) as zenohd with the same set of features. A plugin compiled with different Rust version or with different set of zenoh crate features will be rejected when zenohd attempts to load it. Otherwise, incompatibilities in memory mapping of structures shared between zenohd and the library could lead to a "SIGSEGV" crash.

By default the Zenoh router is delivered or built with 2 plugins. These may be configured through a configuration file, or through individual changes to the configuration via the --cfg CLI option or via zenoh puts on individual parts of the configuration.

Warning

Since v0.6, zenohd no longer loads every available plugin at startup. Instead, only configured plugins are loaded (after processing --cfg and --plugin options). Once zenohd is running, plugins can be hot-loaded and, if they support it, reconfigured at runtime by editing their configuration through the adminspace.

Note that the REST plugin is added to the configuration by the default value of the --rest-http-port CLI argument.

REST plugin (exposing a REST API): This plugin converts GET and PUT REST requests into Zenoh gets and puts respectively.

Storages plugin (managing backends and storages) This plugin allows you to easily define storages. These will store key-value pairs they subscribed to, and send the most recent ones when queried. Check out DEFAULT_CONFIG.json5 for info on how to configure them.

---

Troubleshooting

In case of troubles, please first check on this page if the trouble and cause are already known. Otherwise, you can ask a question on the zenoh Discord server, or create an issue.