Skip to content
/ u2if Public
forked from execuc/u2if

USB to interfaces implementing MicroPython "machine" module functionalities on a computer.

License

Notifications You must be signed in to change notification settings

luxonis/u2if

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

34 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

u2if project

u2if(USB to interfaces) is an attempt to implement some of the MicroPython "machine" module functionalities on a computer. The goal is to be able to communicate with breakout boards (sensors, lcd...) simply from a python program on x86 machine. It uses a Raspberry PICO (or other RP2040 based board) to make the interface between the computer (USB) and peripherals/protocols.

Python led swith on/off:

import time
from machine import u2if, Pin

# Initialize GPIO to output and set the value HIGH
led = Pin(u2if.GP3, Pin.OUT, value=Pin.HIGH)
time.sleep(1)
# Switch off the led
led.value(Pin.LOW)

Caution

It is in experimental state and not everything has been tested. Use with caution. It is supposed to work on windows, linux and Mac. To work in Linux in non-root, an udev rules has to be added (See Firmware readme).

Why this project ?

When I want to retrieve values from a sensor or even to play with a led or a button from the PC, I make an arduino program that communicate to the PC via the serial port. That umplies to define a serial "protocol" between the PC and the arduino and it is not necessarily reusable because it is specific. I find it interesting to implement a majority of the functionalities of the MicroPython machine module and add other protocols.

Solutions already exist, for example Adafruit Blinka from Adafruit via the FT2232H in CircuitPython or pyftdi in Python with the same IC. Note: now, firmware part can be also used with Adafruit Blinka !

Implemented Interfaces

The following features are coded:

Licenses and Project directories

This repository is presented as the sources of a python project (License). But it also contains the following projects:

How to use it

Upload firmware

See Firmware README

Install u2if python package

Install python package from release file (u2if-..tar.gz) with python3 -m pip install dist/u2if-..tar.gz

Build u2if python package

To build package if wanted :

  • If needed, install build: python3 -m pip install --upgrade build
  • Build it: python3 -m build

Examples

There is no documentation but examples can help to use this library :

  • Led On/Off
  • Switch with or whithour irq and debouncing
  • PWM controlling servo-motor
  • Display testing: SSD1306 (I2C and SPI), GC9A01 (round lcd)
  • Some sensors simple test: MPU9250 (IMU), VL53L0X (range), BMP280(Temp)
  • UART read/Write
  • Analog read.
  • Rotrary encoder
  • I2C scan
  • Play 48khz 16bit .wav over I2S DAC (PAM5102)
  • ...

u2if boards/pinout

For simplicity, the pins of the SPI, I2C and UART devices have been fixed. If a peripheral is not used, its pins can be used as a classic I/O. Here are the compatibles boards.

PICO

Implemented interfaces:

  • GPIO
  • ADC
  • PWM
  • UART0 & UART1
  • I2C0 & I2C1
  • SPI0 & SPI1
  • WS2812B
  • I2S

Adafruit Feather RP2040

Implemented interfaces:

  • GPIO
  • ADC
  • PWM
  • UART0
  • I2C0 & I2C1
  • SPI0 & SPI1
  • WS2812B

Adafruit Qt Py RP2040

Implemented interfaces:

  • GPIO
  • ADC
  • PWM
  • UART1
  • I2C0 & I2C1
  • SPI0
  • WS2812B

Adafruit ItsyBitsy RP2040

Implemented interfaces:

  • GPIO
  • ADC
  • PWM
  • UART0
  • I2C1
  • SPI0 & SPI1
  • WS2812B

Adafruit Trinkey QT2040

Implemented interfaces:

  • GPIO
  • ADC
  • PWM
  • UART0
  • I2C0 & I2C1
  • SPI0 & SPI1
  • WS2812B

Troubleshooting

Import error using MicroPython module

import ustruct

The ustruct module is belongs by micropython. There is a micropython-cpython-ustruct compatibility module, but it doesn't seem to work for me. If necessary modify:

import ustruct

to:

import struct as ustruct

import utime & const

Install micropython-cpython-utime and micropython-cpython-micropython.

About

USB to interfaces implementing MicroPython "machine" module functionalities on a computer.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C++ 58.2%
  • Python 28.6%
  • C 8.1%
  • CMake 4.4%
  • Shell 0.7%