Skip to content

SW_imager

Jump to bottom
Rolf Obrecht edited this page Nov 19, 2023 · 3 revisions

Using Raspberry Pi imager (V1.8.1)

All Raspberries support 32-bit images. For piTelex, this is sufficient. Furthermore, the Lite Version is recommended especially for use with smaller Raspis. Downloads and system upgrades will take significantly less time with the light version, and piTelex really only uses the "naked system" without any desktop apps.

  • Select the type of Raspberry Pi or "No filter":

01_Select_Pi 01A_No_filter 02_All-Pi-selected

  • Select Other OS / Pi Os Lite 32bit

03_select_OS 04_Other_OS 05_Select_OSLite

  • Select the target SD card and click "Next" to proceed to the Preferences

06_select-SDcard 07_Next

  • Configure the image: Select "Edit"

08_Edit_Preferences

  • Configure your image:

    • set hostname

    • set username (usually "pi") and password for login

    • configure WiFi (SSID and credentials, Country)

    • configure timezone and keyboard locale

    • activate the ssh server

09_Preferences 10_SSH

  • Confirm your settings

11_Confirm_Preferences

  • Write the customized image to SD card

12_Confirm_Write

  • Et voila...

100_Finished

Consider using release packages for software installation: https://github.com/fablab-wue/piTelex/releases

PiTelex Wiki Start Page

Hardware

Software

Using piTelex

Build Examples

Additional Information

Clone this wiki locally