This repository contains a beginner-friendly STM32CubeIDE project that blinks an LED on an STM32F446RET6 microcontroller using the STM32 HAL (Hardware Abstraction Layer).

This repository contains a bare-metal STM32 project that blinks an LED on an STM32F446RET6 microcontroller by directly manipulating hardware registers — without using HAL or CubeMX.

A beginner-friendly embedded systems project demonstrating how to interface a 16×2 alphanumeric LCD (HD44780 compatible) with the STM32F446RET6 (Nucleo-F446RE) using STM32CubeIDE and HAL libraries.

This project demonstrates interfacing a 128×64 OLED display (SSD1306) with STM32F446RE using pure register-level programming.

A beginner-friendly STM32 project demonstrating how to control a DC motor’s direction and speed using the L293D motor driver and STM32Cube HAL.

A beginner-friendly STM32 firmware project that demonstrates LED blink delay control using two push buttons, implemented using STM32 HAL libraries.

A bare-metal GPIO pin verification project for the STM32F446RET6, written using direct register access — no STM32CubeMX, no HAL pin configuration, no abstraction layers.

This repository demonstrates how to interface a 7-segment display with the STM32F446RET6 microcontroller using pure register-level programming (no HAL, no CubeMX logic).

This repository demonstrates how to interface a 128×64 SSD1306 OLED display with STM32F446RE using I2C and HAL drivers in STM32CubeIDE.

A bare-metal STM32 project that demonstrates LED blink delay control using two push buttons, implemented using direct register access (no HAL GPIO APIs for logic control).

✨ Control LED blink speed using two buttons with direct register access in this bare-metal STM32 project for precise embedded behavior.

🔢 Interact with a 7-segment display using the STM32F446RET6 through direct register programming, enhancing your embedded systems skills and understanding.

💡 Control an STM32F446RET6 LED by directly manipulating hardware registers, enhancing your understanding of microcontroller operations without HAL or CubeMX.

💡 Blink an LED on STM32F446RET6 using HAL in this beginner-friendly project, perfect for learning CubeMX and GPIO toggling.

🔄 Control LED blink speed using two buttons with STM32 HAL libraries for easy GPIO management and clear coding practices.

🔍 Validate STM32F446RET6 GPIO pin connectivity through direct register manipulation for reliable hardware-level verification and self-testing.

🖥️ Interface a 16×2 LCD with STM32F446RET6 using HAL and STM32CubeIDE, focusing on GPIO control and efficient 4-bit communication for practical embedded learning.

🛠️ Interact with a 128×64 OLED display using pure register-level programming on STM32F446RE, understanding I2C at its core without HAL or CubeMX.

🌟 Interface a 128×64 SSD1306 OLED display with STM32F446RE using I2C and HAL drivers, perfect for beginners in embedded software development.