i2cstart

I2CStart

Syntax:

    I2CStart

Command Availability:

Available on all microcontrollers except 12 bit instruction Microchip PIC microcontrollers (10F, 12F5xx, 16F5xx chips)

Explanation:

If the I2C routines are operating in Master mode, this command will send a start condition. If routines are in Slave mode, it will pause the program until a start condition is sent by the master. It should be placed at the start of every I2C transmission.

If interrupt handling is enabled, this command will disable it.

Example:

Please see I2CSend and I2CReceive for an example.

Supported in <I2C.H>