Macro Customization

Happy Hare provides many "callback macros" that, if they exist, will be called at specific times. They are designed for you to be able to extend the base functionality and to implement additional operations. For example, if you want to control your printers LED's based on the action Happy Hare is performing you would modify _MMU_ACTION_CHANGED.

All of the default handlers and examples are defined in either mmu_software.cfg, mmu_form_tip.cfg or mmu_cut_tip.cfg and serve as a starting point for modification.

Note

Most of the macro names can be changed in mmu_parameters.cfg. Therefore it is best practice to copy the reference macro as a starting point into your own cfg file and to RENAME it. Then simply point to your macro instead of these defaults. The reason for that is that the reference set can be upgraded and that would overwrite your changes.

You can also use the klipper mechanism of renaming macros, replacing with your own of the original name and still calling the reference ones here from your custom macro to maintain functionality.

Here are all the callout macros together with details of where to find them:

_MMU_ACTION_CHANGED

Defined in mmu_software.cfg

Most of the time Happy Hare will be in the Idle state but it starts to perform a new action this macro is called. The action string is passed as a ACTION parameter to the macro but can also be read with the printer variable printer.mmu.action. The previous action is passed in as OLD_ACTION

Possible action strings are:

    Idle           No action being performed
    Loading        Filament loading
    Unloading      Filamdng unloading
    Loading Ext    Loading filament into the extruder (usually occurs after Loading)
    Exiting Ext    Unloading filament from the extruder (usually after Foriming Tip and before Unloading)
    Forming Tip    When running standalone tip forming (cannot detect when slicer does it)
    Heating        When heating the nozzle
    Checking       Checking gates for filament (MMU_CHECK_GATES)
    Homing         Homing the selector
    Selecting      When the selector is moving to select a new filament
    Unknown        Should not occur

Here is the start of the reference macro packaged in mmu_software.cfg used to drive LED effects:

###########################################################################
# Called when when the MMU action status changes
#
# The `ACTION` parameter will contain the current action string
# (also available in `printer.mmu.action` printer variable).
# Also the previous action is available in `OLD_ACTION`.
#
# See Happy Hare README for full list of action strings, but a quick ref is:
#
#  Idle|Loading|Unloading|Loading Ext|Exiting Ext|Forming Tip|Heating|Checking|Homing|Selecting
#
# The reference logic here drives a set of optional LED's
#
[gcode_macro _MMU_ACTION_CHANGED]
description: Called when an action has changed
gcode:
    {% set ACTION = params.ACTION|string %}
    {% set OLD_ACTION = params.OLD_ACTION|string %}

_MMU_PRINT_STATE_CHANGED

Defined in mmu_software.cfg

Happy Hare implements a state machine tracking the prgoress of a print. It is difference from the klipper print_stats because it is specific to MMU state during a print. Full details can be found here. Every time a state changes this macro will be called. Then new state will be passed with the STATE parameter and the previous state as OLD_STATE. The state can also be read with the printer variable printer.mmu.print_state

Possible state strings are:

    initialized    State occurs on first bootup or after initialization command like `MMU_RESET` or `MMU ENABLE=0 -> MMU ENABLE=1`
    ready          MMU is idle out of a print
    started        Short lived state the occurs during the startup phase when starting a print
    printing       State meaning that a print is underway
    complete       End state that occurs after a print has sucessfully finished printing
    cancelled      End state that occurs if a print is cancelled
    error          End state when a print ends in an error
    pause_locked   State that indicates MMU has experienced and error and certain features are locked until `MMU_UNLOCK` is run
    paused         State that occurs after `MMU_UNLOCK`
    standby        Printer has been idle for extended period of time

Here is the start of the reference macro packaged in mmu_software.cfg used to drive LED effects:

###########################################################################
# Called when the MMU print state changes
#
# The `STATE` parameter will contain the current state string
# (also available in `printer.mmu.print_state` printer variable)
# Also the previous action is available in `OLD_STATE`.
#
# See Happy Hare README for full list of state strings and the state transition
# diagram, but a quick ref is:
#
#  initialized|ready|started|printing|complete|cancelled|error|pause_locked|paused|standby
#
# The reference logic here drives a set of optional LED's
#
[gcode_macro _MMU_PRINT_STATE_CHANGED]
description: Called when print state changes
gcode:
    {% set STATE = params.STATE|string %}
    {% set OLD_STATE = params.OLD_STATE|string %}

_MMU_GATE_MAP_CHANGED

Defined in mmu_software.cfg

Happy Hare maintains a map of all the filaments in the MMU including material type, color, etc. When this map changes this macro is called. The GATE parameter will either represent a specific gate that has been updated or -1 meaning that mutliple gates are updated. The actual gate map infomation can be read through printer variables printer.mmu.gate_color, printer.mmu.gate_material, etc..

Here is the start of the reference macro packaged in mmu_software.cfg used to drive LED effects:

###########################################################################
# Called when the MMU gate_map (containing information about the filament
# type, color, availability and spoolId) is updated
#
# The `GATE` parameter will contain the gate that is updated or -1 if all updated
#
# The reference logic here drives a set of optional LED's
#
[gcode_macro _MMU_GATE_MAP_CHANGED]
description: Called when gate map is updated
gcode:
    {% set GATE = params.GATE|int %}

Unloading / Loading "Sequence" Macros

Defined in mmu_sequence.cfg

This set of macros are called during filament loading or unloading. They can be used for the insertion of logic specific to your printer setup. The ordering of these macros is as follows (if any are not defined they are skipped):

Unloading sequence...
  _MMU_PRE_UNLOAD             Called before starting the unload
    'form_tip_macro'          User defined macro for tip forming
  _MMU_POST_FORM_TIP          Called immediately after tip forming
    (_MMU_UNLOAD_SEQUENCE)    Advanced: Optionally called based on 'gcode_unload_sequence'
  _MMU_POST_UNLOAD            Called after unload completes

Loading sequence...
  _MMU_PRE_LOAD               Called before starting the load
    (_MMU_LOAD_SEQUENCE)      Advanced: Optionally called based on 'gcode_load_sequence'
  _MMU_POST_LOAD              Called after the load is complete

If changing a tool the unload sequence will be immediately followed by the load sequence. Note that Happy Hare has some built in functionality to minimize the logic necessary in these macros:

• Happy Hare separately implements z-hop moves on toolchange (including EndlessSpool) specified with the 'z_hop_height_toolchange' parameter as well as on errors and print cancellation with 'z_hop_error' parameter.
• Toolhead will be correctly placed prior to resuming the print although the logic will only be expecting to correct z_hop height and will be slow if horizonal moves are necessary
• Pressure advance will automatically be restored after tip forming
• M220 & M221 overrides will be retained after a toolchange
• If configured, Spoolman will be notified of toolchange
• Should an error occur causing a pause, the extruder temperature will be saved and restored on MMU_UNLOCK or resume

Leveraging the basic callbacks is usually sufficent for customization, however if you really want to do something unusual you can enable the gcode loading/unloading sequences by setting the following in 'mmu_parameters.cfg'

gcode_load_sequence: 1
gcode_unload_sequence: 1

This is quite advanced and you will need to understand the Happy Hare state machine before embarking on changes. Read Custom Load/Unload Sequences for more details.

The behavior of these default macros is controlled by the following set of variables found at the top of the mmu_sequence.cfg file. Once you have set variable_park_xy to the coordinates of a safe park area (usually over your purge bucket) you can set variable_enable_park: 1 to enable movement of the toolhead away from the print while changing filaments.

###########################################################################
# Variables controlling sequence macros are all set here
#
[gcode_macro _MMU_Variables]
variable_enable_park: 0                 # Whether the parking move is enabled. Turn on after setting park_xy
variable_park_xy: 50, 50                # Coordinates of park position for toolchange
variable_park_z_hop: 1                  # Additional Z_hop when toolchanging
variable_travel_speed: 200              # XY travel speed in mm/s
variable_lift_speed: 15                 # Z travel speed in mm/s
variable_auto_home: 0                   # Automatically home if necessary (mainly testing use case)
variable_park_after_form_tip: 0         # Set to 1 if tip cutting at toolhead to delay move to park position

Note

Generally variable_park_after_form_tip will be 0 meaning the move away from the print is immediate. If you are using a cutter at the toolhead you will want to set this to 1. This delays the move until after the movement defined in the tip cutting macro.

Here are some examples of logic that might be put in these macros:

_MMU_PRE_UNLOAD (mmu_sequence.cfg)

Logic here would typically move the toolhead to a safe spot like over the purge bucket

_MMU_POST_FORM_TIP (mmu_sequence.cfg)

Optional this logic would do the same this as _MMU_PRE_UNLOAD in the case of a tip cutting movement

_MMU_POST_UNLOAD (mmu_sequence.cfg)

Logic here can be used to implement tip cutting and cleanup at the MMU gate

_MMU_PRE_LOAD (mmu_sequence.cfg)

This is a great spot to add logic to take time lapse photography (although it can also be done elsewhere)

_MMU_POST_LOAD (mmu_sequence.cfg)

Logic here can perform extra purging operations, pause for ooze and then wipe nozzle before returning to the original position recorded in either the _MMU_PRE_UNLOAD or _MMU_POST_FORM_TIP macros

Note

Although Happy Hare has defensive logic to always return the toolhead to the correct position it may do this slowly because it is only anticipating a z_hop movement. A common problem is that the _MMU_POST_LOAD does not restore the X/Y toolhead position correctly leading to this strange slow movement.

_MMU_FORM_TIP

Defined in form_tip.cfg

This is probably the most important aspect of getting a reliable MMU after basic calibration is complete. There is plenty written about tip forming and lots of advice in the forums. What is important to understand here is that this macro mimicks the tip forming logic from SuperSlicer (almost identical to PrusaSlicer). Read SuperSlicer documentation for hints. That said, here are a few things you should know:

• This macro will always be used when not printing, but you can elect to use it instead of your slicers logic by:
• Turning OFF all tip forming logic in your slicer
• Setting the variable_standalone: 1 in the T0 macro
• When tuning if is useful to pull the bowden from your extruder, load filament with the MMU_LOAD EXTRUDER_ONLY=1 command, then call MMU_FORM_TIP command (and not the macro directly) or better still MMU_EJECT EXTRUDER_ONLY=1
• The benefit of calling as desribed is the additional TMC current control and pressure advance restoration will occur so it exactly mimicks what will occur when called automatically later
• If calling MMU_FORM_TIP you will want to set variable_final_eject: 1 so that the filament is fully ejected for inspection (MMU_EJECT will automatically do this and therefore is recommended)
• Calling with MMU_EJECT EXTRUDER_ONLY=1 will also report on the final parking position of the filament
• Before you start tweaking, make sure the settings accurately represent the geometry of your extruder. The defaults are for my Voron Clockwork 2 extruder with Voron Revo hotend with 0.4mm tip
• Lastely there is a setting called parking_distance which, if set, will determine the final resting place measured from the nozzle. This should be a postive number!

Here are the default values for tip forming. These are the exact values I used for non PLA filaments (PLA seems to like skinny dip):

# Unloading and Ramming values - Initial moves to form and shape tip
variable_unloading_speed_start: 80     # Fast here to seperate the filament from meltzone (Very intitial retract SS uses distance of E-15)
variable_unloading_speed: 20           # Too fast forms excessively long tip or hair. Slow is better here UNLOADING_SPEED_START/COOLING_MOVES seems a good start
variable_ramming_volume: 0             # in mm3 SS default values = 2, 5, 9, 13, 18, 23, 27. Only Used to Simulate SS Ramming during standalone
variable_ss_ramming: 0                 # Set to 0 for standalone ramming (RAMMING_VOLUME) or tuning, 1 to let the slicer do it (i.e. turn off standalone)

# Cooling Move Values - To cool the tip formed and separate from strings
variable_cooling_tube_position: 35     # Dragon ST: 35, Dragon HF: 30, Mosquito: 30, Revo: 35, Phaetus Rapido HF: 43;  Measured from Top of Heater Block to Top of Heatsink
variable_cooling_tube_length: 10       # Dragon ST: 15, Dragon HF: 10, Mosquito: 20, Revo: 10, Phaetus Rapido HF: 22; Measured from Nozzle to Top of Heater Block
variable_initial_cooling_speed: 10     # Slow to solidify tip and cool string if formed.
variable_final_cooling_speed: 50       # High speed break the string formed. Too fast = tip deformation during eject. Too Slow = long string/no seperation
variable_toolchange_temp: 0            # Used if you want to lower temp during toolchanges default 0
variable_cooling_moves: 4              # 2-4 is a good start

# SkinnyDip values - To burn off VERY FINE hairs only (This is NOT for long tip reshaping)
variable_use_skinnydip: 1              # Tune this LAST, this is for removal of VERY FINE hairs only (Different than a long tip)
variable_skinnydip_distance: 30        # Start just under Cooling_tube_position and increase - Will depend on how much Ramming Volume is used
variable_dip_insertion_speed: 30       # Medium-Slow - Just long enough to melt the fine hairs. Too slow will pull up molten filament
variable_dip_extraction_speed: 70      # Around 2x Insertion speed, Prevents forming new hairs
variable_melt_zone_pause: 0            # in milliseconds - default 0
variable_cooling_zone_pause: 0         # in milliseconds - default 0 - If you need to adjust here its possible Dip Insertion too slow
variable_use_fast_skinnydip: 0         # Skip the toolhead temp change during skinnydip move - default 0

# Park filament ready to eject
variable_parking_distance: 35          # Final filament parking position after final cooling move, 0 will leave filament where it naturally ends up

# Final Eject - for standalone tuning only. Automatically set by `MMU_FORM_TIP` command
variable_final_eject: 0                # default 0, enable during standalone tuning process to eject the filament

_MMU_CUT_TIP

Defined in cut_tip.cfg

To elminate the need to spend time tuning the tip forming procedure (you never wanted to understand fluid dynamics, right?!) you can opt to cut filament at the toolhead. The filametrix cutter bundled with ERCFv2 is an example of this. Note that Happy Hare can only have one tip creation macro defined. You can switch from the default tip forming to this tip cutting macro by setting form_tip_macro: _MMU_CUT_TIP in mmu_parameters.cfg to point to this macro instead.

Here are the default values for tip cutting with explanation:

###########################################################################
# Happy Hare supporting macros
#   Standalone Tip Cutting for Filametrix and toolhead cutters
#
# To configure, set
#   'form_tip_macro: _MMU_CUT_TIP' in 'mmu_parameters.cfg'
#
# Default configuration is good for Stealthburner with CW2 and Voron Revo nozzle
#
# IMPORTANT:
#   The park position of the filament is relative to the nozzle and
#   represents where the end of the filament is after cutting. The park position
#   is important and used by Happy Hare both to finish unloading the extruder
#   as well as to calculate how far to advance the filament on the subsequent load.
#   It is important to report back the position your cutter leaves the filament
#   in the extruder via the variable 'output_park_pos'.
#
#   This can be set dynamically in gcode with this construct:
#     SET_GCODE_VARIABLE MACRO=_MMU_CUT_TIP VARIABLE=output_park_pos VALUE=..
#   or preset as a variable on the macro like this:
#     'variable_output_park_pos: 35'
#
# When using this macro it is important to turn off tip forming in your slicer and
# force Happy Hare to always run this when loading filament by adding:
#   'force_form_tip_standalone: 1' in 'mmu_parameters.cfg'
#
[gcode_macro _MMU_CUT_TIP]
description: Cut filament by pressing the cutter on a pin with a horizontal movement

# This should be set to the distance from the internal nozzle tip to the cutting blade and is used in calculations on the
# final location of the filament end (output_park_pos) and remaining filament fragment size (output_remaining_filament)
# for use by Happy Hare
variable_blade_pos: 37.5

# Distance to retract prior to making the cut, this reduces wasted filament but might cause clog 
# if set too large and/or if there are gaps in the hotend assembly 
# This must be less than 'balde_pos' - the distance from the nozzle to the cutter 
variable_retract_length: 32.5

# The location of the pin, this should be the position of the toolhead when the cutter 
# just lightly touches the pin
variable_pin_loc_x: 14
variable_pin_loc_y: 250

# The starting and end positions when making the cut
# In particular, instead of making the cut by traveling to the pin location above, 
# we leave a small safety margin along X-axis to avoid scratching on the pin when traveling
# This should also give a small distance to produce some momentum when pressing on the pin 
variable_pin_park_x_dist: 5.0

# Position of the toolhead when the cutter is fully compressed
# Should leave a small headroom (e.g., should be a bit larger than 0, or whatever xmin is) to avoid banging the toolhead or gantry
variable_pin_loc_x_compressed: 0.5
variable_pin_loc_x_compressed: 0.5

# Retract length and speed after the cut so that the cutter can go back into its origin position
variable_rip_length: 1                  # Distance to retract to aid lever decompression (>= 0)
variable_rip_speed: 3                   # mm/s

# Pushback of the remaining tip from the cold end into the hotend. Cannot be larger than 'retract_length'
variable_pushback_length: 5
variable_pushback_dwell_time: 0         # Time to dwell after the pushback

# Speed related settings
# Note that if the cut speed is too fast, the steppers can lose steps. Therefore, for a cut: 
# - We first make a fast move to accumulate some momentum and get the cut blade to the initial contact with the filament
# - We then make a slow move for the actual cut to happen 
variable_travel_speed: 150              # mm/s
variable_cut_fast_move_speed: 32        # mm/s
variable_cut_slow_move_speed: 8         # mm/s
variable_evacuate_speed: 150            # mm/s
variable_cut_dwell_time: 50             # Time to dwell at the cut point in ms
variable_cut_fast_move_fraction: 1.0    # Fraction of the move that uses fast move 

variable_extruder_move_speed: 25        # mm/s for all extruder movement

# Safety margin for fast vs slow travel
# When traveling to the pin location, we make a safer but longer move if we closer to the pin than this specified margin
# Usually setting these to the size of the toolhead (plus a small margin) should be good enough 
variable_safe_margin_x: 30
variable_safe_margin_y: 30

# If gantry servo option is installed, enable the servo and set up and down angle positions
variable_gantry_servo_enabled: 0
variable_gantry_servo_down_angle: 55
variable_gantry_servo_up_angle: 180

# Testing only: Whether to eject the filament at the end
variable_final_eject: 0                 # Don't leave enabled!

# -------------------------- Internal Don't Touch -------------------------
variable_output_park_pos: 0             # Dynamically set in macro

Note

The output_park_pos variable is used to pass the resultant position of the filament back to Happy Hare and in this reference macro it is set dynamically.