How To: Use The Projector

To operate the projector you will need the remote control, which is a small light-coloured and slightly curvy device with buttons marked "HDMI1" and "HDM12" near the bottom.

Standing directly underneath the projector and pointing the remote control up at it gets the best results.

To turn on the projector, press the "On" button. To turn it off, press the "off" button twice.

There are two ways to connect to the projector.

1. There is an HDMI socket next to the screen. Turn on the projector and select HDMI1. Then connect an HDMI cable to the device you wish to project from and the socket on the wall.
2. There is a Chromecast connected to HDMI 2. Turn on the projector and select HDMI2. Then connect to the Chromecast from a computer, tablet, or phone to display its screen or cast media to it.

You may need to adjust the screen to get a good picture, be careful when doing so.