DGC3

Clamp for Gates GT2 5MR 2mm pitch, 6mm wide synchronous belt ...

Attaches to 15x15mm aluminum extrusion with two M3 10mm screws and two square nuts

<img src=https://sites.google.com/site/firepickflorentine/parts/2013-01-jan/DGC3.JPG?attredirects" width="200px" />

Function

Top half is clamp. Bottom half connects to 15mm Misumi extrusion. For affixing belts to 3mm acrylic panels, only top half is required.

Includes

• Clamp
• Extrusion connector

Bill of Materials

@Sources

• version 3: http://shpws.me/pKVV 6 stops and 6 clamps (1/12)
• version 2: M3 nut recess simplifies tightening http://shpws.me/oHdk
• version 1: individual part http://shpws.me/n6hB
• version 1: assembly http://shpws.me/n6ht

@Requires

• M3 screw
• M3 nut

See Also

• X50T Nema 17 bracket
• DGI5 Idler bracket
• X50S Limit switch bracket
• Print your own